Mercedes-Benz type 190 SL Roadster










General
| Short name | 190 SL Roadster |
|---|---|
| Name | Mercedes-Benz type 190 SL Roadster |
| Model | W 121 B II |
| Production | 01.55/05.55 - 02.63 |
| Number produced | 25.881 roadster and coupés |
| Comments concerning the production period | begin of production - pre-production batch / main production - end of production |
| Prices | 16.500,00 DM |
Dimensions and weights
| Wheelbase | 2400 mm |
|---|---|
| Track front/rear | 1430/1475 mm |
| Length | 4290 mm |
| Width | 1740 mm |
| Height | 1320 mm (with cabriolet top closed) |
| Smallest turning circle | 11,0 m |
| Weight empty | 1140 kg; since 1960: 1160 kg |
| According to guideline | DIN 70020 (with fuel, spare wheel and tool equipment) |
| Max. total weight | 1400 kg; since 1960: 1440 kg |
| Max. front axle weight | 680 kg; since 1960: 690 kg |
| Max. rear axle weight | 720 kg; since 1960: 750 kg |
| Max. load | 260 kg; since 1960: 280 kg |
| Max. trailer weight braked | 1200 kg |
| Max. trailer weight unbraked | 620 kg |
Engine
| Operating method | four-stroke Otto |
|---|---|
| Configuration | front, parallel; upright |
| Type | M 121 B II / 121.921, since 08.61: M 121 B IX / 121.928 |
| No. of cylinders/configuration | 4 / in line |
| Bore x stroke | 85 x 83,6 mm |
| Total displacement | 1897 ccm (tax classification: 1882 ccm) |
| Compression ratio | 8,5; since 09.59: 8,8 |
| Crankshaft bearings | 3 |
| Output | 105 hp at 5700 /min |
| Maximum torque | 14,5 mkg at 3200 /min |
| No. of valves/configuration | 1 intake, 1 exhaust / overhead |
| Valve operation | top camshaft |
| Camshaft drive | duplex roller-type chain |
| Mixture formation | 2 register-downdraught carburetters Solex 44 PHH |
| Cooling | water cooling / pump; 10 l water |
| Lubrication | pressure circulation lubrication / 4 l oil |
Electrical system
| Electric system | 12 V |
|---|---|
| Battery | 56 Ah / in the engine compartment |
| Dynamo | 160 W |
| Starter motor | electrical / 0,8 PS |
| Ignition | battery ignition |
Fuel system
| Fuel tank | in the rear / 65 l |
|---|---|
| Fuel supply | diaphragm pump |
Drivetrain and chassis
| Driven wheels | rear wheels |
|---|---|
| Power transmission | divided cardan shaft |
| Frame design | floor assembly / self-supporting all-steel body |
| Wheel suspension front | double wishbone |
| Wheel suspension rear | single-joint swing axle |
| Suspension front | coil springs, torsion bar stabilizer |
| Suspension rear | coil springs |
| Dampers | hydraulic telescopic damper |
| Steering | recirculating-ball steerg. |
| Steering ratio | 18,5:1 / 3,5 steering wheel turns |
| Braking system | hydraulic, since 05.56 with vacuum-operated brake servo unit, effective on front- and rear wheels ; drum brakes front and rear |
| Parking brake | mechanical, effective on rear wheels |
| Brake diameter | brake drums front / rear: 230 mm |
| Wheels | sheet steel-disc wheels |
| Wheel rims | drop centre rim 5 K x 13 |
| Tyres | 6,40-13 Sport |
Gearbox and performance
| Version 1 | Version 2 | |
|---|---|---|
| Gearbox | 4-speed gear shift | 4-speed gear shift |
| Availability | Series (1. execution) | Series (2. execution) |
| Shifting | Control rod car center | Control rod car center |
| Clutch | Single-plate dry clutch | Single-plate dry clutch |
| Type of gearbox | Pinion change gear | Pinion change gear |
| Synchromesh gears | I - IV | I - IV |
| Gear ratios | I. 3,40; II. 2,00; III. 1,29; IV. 1,0; R. 3,29 | I. 3,52; II. 2,32; III. 1,52; IV. 1,0; R. 3,29 |
| Differential ratio | 3,70; 3,89 or 3,90 | 3,90 |
| Maximum speed | 170 - 180 km/h | 170 - 180 km/h |
| Acceleration | 14,5 s | 14,5 s |
| Comments | Acceleration with shifting through from 0 - 100 km/h; loaded with 2 persons | Acceleration with shifting through from 0 - 100 km/h; loaded with 2 persons |
| Fuel consumption | 8,6 l | 8,6 l |
| Acc. to guideline | DIN 70030, ascertained at 3/4 of max. speed, maximal 110 km/h, unter Zuschlag von 10 % | DIN 70030, ascertained at 3/4 of max. speed, maximal 110 km/h, unter Zuschlag von 10 % |