Mercedes Simplex 60 hp





General
| Short name | Mercedes Simplex 60 hp |
|---|---|
| Name | Mercedes Simplex 60 hp |
| Production | 1902 - 1905 |
Dimensions and weights
| Wheelbase | 2650, 2750 or 3475 mm |
|---|---|
| Track front/rear | 1450 mm |
| Length | travel saloon: 4730 mm |
| Width | travel saloon: 1870 mm |
| Height | travel saloon: 2540 mm |
| Chassis | 1300 kg |
| Weight empty | Tour saloon: 2230 kg |
Engine
| Operating method | four-stroke |
|---|---|
| Configuration | front, parallel; upright |
| No. of cylinders/configuration | 4 / in line (in pairs) |
| Bore x stroke | 140 x 150 mm |
| Total displacement | 9235 ccm |
| Crankshaft bearings | 3 |
| Output | 60 hp at 1600 /min |
| No. of valves/configuration | 1 intake / overhead in Zylinderwithte; 1 exhaust / lateral, upright |
| Valve operation | 1 lateral camshaft |
| Camshaft drive | via spur gears |
| Mixture formation | piston-type carburetter |
| Cooling | water cooling / pump; ventilator, honeycomb radiator |
| Lubrication | bath lubrication, drop oiler |
Electrical system
| Starter motor | starting crank with desupercharger |
|---|---|
| Ignition | low-voltage magneto make-and-break ignition |
Fuel system
| Fuel tank | under the car's rear / 120 l |
|---|---|
| Fuel supply | exhaust-gas pressure |
Drivetrain and chassis
| Driven wheels | rear wheels |
|---|---|
| Power transmission | chains |
| Frame design | U-type sectional pressed-steel frame |
| Wheel suspension front | rigid axle |
| Wheel suspension rear | rigid axle |
| Suspension front | split springs |
| Suspension rear | split springs |
| Steering | screw spindle, right |
| Braking system | mechanical (water-cooled), effective on drive shaft |
| Parking brake | mechanical, effective on rear wheels |
| Wheels | wood-spoked wheels with steel rims (not detachable) |
| Tyres | front 910 x 100, rear 920 or 1020 x 120 |
Gearbox and performance
| Gearbox | 4-speed gear shift |
|---|---|
| Shifting | Control lever right ext. or int. (connection link) |
| Clutch | Spider coupling |
| Type of gearbox | Pinion sliding-gear |
| Maximum speed | 80 - 90 km/h |