Mercedes-Benz type 200 D










































General
| Short name | 200 D |
|---|---|
| Name | Mercedes-Benz type 200 D |
| Model | W 110 D II |
| Production | 07.65 - 02.68 |
| Number produced | 159.365 saloons |
| Prices | 08.65: 11.300,00 DM 08.66: 11.500,00 DM |
Dimensions and weights
| Wheelbase | 2700 mm |
|---|---|
| Track front/rear | 1482/1485 mm |
| Length | 4730 mm |
| Width | 1795 mm |
| Height | 1495 mm |
| Smallest turning circle | 11,4 m |
| Weight empty | 1325 kg |
| According to guideline | DIN 70020 (with fuel, spare wheel and tool equipment) |
| Max. total weight | 1825 kg |
| Max. front axle weight | 845 kg |
| Max. rear axle weight | 980 kg |
| Max. load | 500 kg |
| Max. trailer weight braked | 1200 kg |
| Max. trailer weight unbraked | 700 kg |
Engine
| Operating method | four-stroke Diesel (with indirect injection) |
|---|---|
| Configuration | front, parallel; upright |
| Type | OM 621 VIII / 621.918 |
| No. of cylinders/configuration | 4 / in line |
| Bore x stroke | 87 x 83,6 mm |
| Total displacement | 1988 ccm (tax classification: 1971 ccm) |
| Compression ratio | 21 |
| Crankshaft bearings | 5 |
| Output | 55 hp at 4200 /min |
| Maximum torque | 12 mkg at 2400 /min |
| No. of valves/configuration | 1 intake, 1 exhaust / overhead |
| Valve operation | top camshaft |
| Camshaft drive | duplex roller-type chain |
| Mixture formation | indirect injection, mechanically controlled; Bosch 4-plunger-type injection pump |
| Cooling | water cooling / pump; 10,1 l water |
| Lubrication | pressure circulation lubrication / 4 l oil |
Electrical system
| Electric system | 12 V |
|---|---|
| Battery | 66 Ah / in the engine compartment |
| Dynamo | three-phase AC / 490 W |
| Starter motor | electrical / 1,8 PS |
| Ignition | compression ignition engine |
Fuel system
| Fuel tank | in the rear / 65 l |
|---|---|
| Fuel supply | piston pump at the injection pump |
Drivetrain and chassis
| Driven wheels | rear wheels |
|---|---|
| Power transmission | divided cardan shaft |
| Frame design | floor assembly / self-supporting all-steel body |
| Wheel suspension front | double wishbone |
| Wheel suspension rear | single-joint swing axle with compensating spring, on demand with hydropneumatic level control |
| Suspension front | coil springs, torsion bar stabilizer |
| Suspension rear | coil springs |
| Dampers | hydraulic telescopic damper |
| Steering | rec.-ball steering; on demand ball-and-nut power steering |
| Steering ratio | 22,8:1 / 4,1 steering wheel turns; w/ power steering: 17,2:1 / 3,2 swt. |
| Braking system | hydraulic dual-circuit braking system with vacuum-operated brake servo unit, effective on front- and rear wheels ; disc brakes front and drum brakes rear |
| Parking brake | mechanical, effective on rear wheels |
| Brake diameter | brake discs front 253 mm; brake drums rear 230 mm |
| Wheels | sheet steel-disc wheels |
| Wheel rims | drop centre rim 5 JK x 13 HB |
| Tyres | 7,00-13 |
Gearbox and performance
| Version 1 | Version 2 | |
|---|---|---|
| Gearbox | 4-speed gear shift | 4-speed autom. gear shift |
| Availability | Series | by request |
| Shifting | steering wheel, by request feed control | Switch lever at steering wheel, by request in car center |
| Clutch | Single-plate dry clutch | hydr. clutch in the autom. gear |
| Type of gearbox | Pinion change gear | Planet gear |
| Synchromesh gears | I - IV | |
| Gear ratios | I. 4,09; II. 2,25; III. 1,42; IV. 1,0; R. 3,62 | I. 3,98; II. 2,52; III. 1,58; IV. 1,0; R. 3,62 |
| Differential ratio | 3,92 | 3,92 |
| Maximum speed | 130 km/h | 127 km/h |
| Acceleration | 28,1 s | 30,2 s |
| Comments | Acceleration with shifting through from 0 - 100 km/h; loaded with 2 persons | Acceleration with shifting through from 0 - 100 km/h; loaded with 2 persons |
| Fuel consumption | 8,1 l | 8,1 l |
| Acc. to guideline | DIN 70030, ascertained at 3/4 of max. speed, maximal 110 km/h, unter Zuschlag von 10 % | DIN 70030, ascertained at 3/4 of max. speed, maximal 110 km/h, unter Zuschlag von 10 % |