Benz 18/45 hp




















General
| Short name | Benz 18/45 hp |
|---|---|
| Name | Benz 18/45 hp |
| Production | 1914 - 1921 |
Dimensions and weights
| Wheelbase | 3400 mm |
|---|---|
| Track front/rear | 1400 mm |
| Length | saloon: 4680 mm |
| Width | saloon: 1720 mm |
| Height | saloon: 2180 |
| Chassis | 1250 kg |
Engine
| Operating method | four-stroke |
|---|---|
| Configuration | front, parallel; upright |
| No. of cylinders/configuration | 4 / in line (in pairs) |
| Bore x stroke | 100 x 150 mm |
| Total displacement | 4710 ccm |
| Compression ratio | 4,15 |
| Crankshaft bearings | 3 |
| Output | 45 hp at 1650 /min |
| No. of valves/configuration | 1 intake, 1 exhaust / lateral, upright (L-disposition) |
| Valve operation | 1 lateral camshaft |
| Camshaft drive | via chain |
| Mixture formation | Zenith carburetter |
| Cooling | water cooling / pump; 15 l water |
| Lubrication | pressure circulation lubrication |
Electrical system
| Ignition | double ignition (combined magneto and battery ignition) |
|---|
Fuel system
| Fuel tank | in the rear / 75 l |
|---|---|
| Fuel supply | exhaust-gas pressure |
Drivetrain and chassis
| Driven wheels | rear wheels |
|---|---|
| Power transmission | cardan shaft |
| Frame design | pressed-steel frame |
| Wheel suspension front | rigid axle |
| Wheel suspension rear | rigid axle |
| Suspension front | split springs |
| Suspension rear | split springs |
| Steering | screw spindle, right |
| Braking system | outside shoe brake, effective on gearbox input shaft |
| Parking brake | internal shoe-type brake, effective on rear wheels ; hillholder |
| Wheels | wood-spoked (wheel rims detachable) or Rudge wire-spoked wheels |
| Tyres | 880 x 120 or 935 x 135 |
Gearbox and performance
| Gearbox | 4-speed gear shift |
|---|---|
| Shifting | Control lever right center (connecting link |
| Clutch | Leather cone clutch |
| Type of gearbox | Pinion change gear |
| Maximum speed | 75 km/h |
| Fuel consumption | 20 l |