| |
|
Coups of the series 124
Mercedes-Benz type 220 CE |
| Type |
220 CE |
| Name |
220 CE |
| Name |
Mercedes-Benz type 220 CE |
| Short name |
220 CE |
| Model |
C 124 E 22 |
| Production |
06.92/09.92 - 07.93 |
| Number produced |
altogether 12.337 (until 03.96) |
| Comments concerning the production period |
begin of production - pre-production batch / main production - end of production |
| Prices |
10.92: 64.296,00 DM
01.93: 65.492,50 DM |
| Wheelbase |
2715 mm |
| Track rear/front |
1501/1491 mm ("Sportline": 1518/1509 mm) |
| Length |
4655 mm |
| Width |
1740 mm |
| Height |
1394 mm ("Sportline": 1375 mm) |
| Smallest turning circle |
10,99 m |
| Chassis weight |
| Max. total weight |
1890 kg |
| Max. front axle weight |
930 kg |
| Max. rear axle weight |
960 kg |
| Max. load |
500 kg |
| Max. trailer weight braked |
1890 kg |
| Max. trailer weight unbraked |
730 kg |
| Weight empty |
1390 kg |
| According to guideline |
DIN 70020 (with fuel, spare wheel and tool equipment) |
| Operating method |
four-stroke Otto (w/ manifold-injection and emission control device w/ three-way catalyst) |
| Configuration |
front, parallel; upright |
| Type |
M 111 E 22 / 111.960 |
| No. of cylinder/configuration |
4 / in line; 15ř inclination to the right |
| Bore x stroke |
89,9 x 86,6 mm |
| Total displacement |
2199 ccm |
| Compression ratio |
10,0 |
| Crankshaft bearing |
5 |
| Output |
150 hp / 110 kW at 5500 /min |
| Maximum torque |
210 Nm at 4000 /min |
| No. of valves/configuration |
2 intake, 2 exhaust / V-shaped overhead |
| Valve operation |
2 top camshafts (intake camshaft adjustable) |
| Camshaft drive |
duplex roller-type chain |
| Mixture formation |
microprocessor-controlled injection system with~hot-film air-mass sensor (HFM) |
| Cooling |
water cooling / pump; 8,5 l water |
| Lubrication |
pressure circulation lubrication / 5,8 l oil |
| Electric system |
12 V |
| Battery |
62 Ah / in the engine compartment |
| Dynamo |
three-phase AC / 980 W |
| Starter motor |
electrical / 1,4 kW |
| Ignition |
ignition mapping control |
| Fuel tank |
above the rear axle / 70 l |
| Fuel supply |
electric supply pump |
| Driven whells |
rear wheels |
| Power transmission |
divided cardan shaft |
| Frame desing |
self-supporting all-steel body |
| Wheel suspension front |
triangle-wishbone / shock-absorber strut |
| Wheel suspension rear |
multilink suspension, on demand with hydropneumatic level control |
| Suspension front |
coil springs, torsion bar stabilizer |
| Suspension rear |
coil springs, torsion bar type stabilizer |
| Damper |
gas-pressure shock absorber struts / gas-pressure damper |
| Steering |
ball-and-nut power steering |
| Steering transm ratio |
16,21:1 / 3,3 steering wheel turns |
| Breaking system |
braking system |
| Breaking system |
hydraulic dual-circuit braking system with vacuum-operated brake servo unit and antilock device;~disc brakes front (intern. ventilated) and rear |
| Parking breake |
parking brake |
| Parking breake |
mechanical (foot-operated), effective on rear wheels |
| Diamatre |
brake discs front / rear: 284 / 258 mm |
| Wheels |
sheet steel-disc wheels, on demand light-alloy disc wheels |
| Wheels rims |
6 1/2 J x 15 H 2; for sports suspension: 7 J x 15 H 2 |
| Tyres |
195/65 R 15 91 V; for sports suspension: 205/60 ZR 15 |