|
|
Coups of the series 124 Mercedes-Benz type 230 CE |
Type |
230 CE |
Name |
230 CE |
Name |
Mercedes-Benz type 230 CE |
Short name |
230 CE |
Model |
C 124 E 23 |
Production |
07.86/04.87 - 08.89 |
Number produced |
altogether 33.675 (until 09.92) |
Comments concerning the production period |
begin of production - pre-production batch / main production - end of production |
Prices |
03.87: 50.331,00 DM
02.88: 53.808,00 DM
09.88: 54.150,00 DM
02.89: 55.290,00 DM |
Wheelbase |
2715 mm |
Track rear/front |
1497/1488 mm |
Length |
4655 mm |
Width |
1740 mm |
Height |
1410 mm; since 11.88: 1395 mm |
Smallest turning circle |
10,92 m |
Chassis weight |
Max. total weight |
1790 kg; since 12.88: 1810 kg |
Max. front axle weight |
855 kg; since 12.88: 865 kg |
Max. rear axle weight |
935 kg; since 12.88: 945 kg |
Max. load |
450 kg |
Max. trailer weight braked |
1500 kg; since 05.89: 1850 kg |
Max. trailer weight unbraked |
705 kg; since 12.88: 715 kg |
Weight empty |
1340 kg; since 12.88: 1360 kg |
According to guideline |
DIN 70020 (with fuel, spare wheel and tool equipment) |
Operating method |
four-stroke Otto (w/ manifold-injection and emission control device w/ three-way catalyst) |
Configuration |
front, parallel; upright |
Type |
M 102 E 23 / 102.982 |
No. of cylinder/configuration |
4 / in line; 15ř inclination to the right |
Bore x stroke |
95,5 x 80,25 mm |
Total displacement |
2299 ccm (tax classification: 2276 ccm) |
Compression ratio |
9,0 |
Crankshaft bearing |
5 |
Output |
132 hp / 97 kW (RF-version: 136 hp / 100 kW) at 5100 /min |
Maximum torque |
198 Nm (RF-version: 205 Nm) at 3500 /min |
No. of valves/configuration |
1 intake, 1 exhaust / V-shaped overhead |
Valve operation |
top camshaft |
Camshaft drive |
simple roller-type chain |
Mixture formation |
manifold-injection, mechano-electronically controlled~(Bosch KE-Jetronic) |
Cooling |
water cooling / pump; 8,5 l water |
Lubrication |
pressure circulation lubrication / 5 l oil |
Electric system |
12 V |
Battery |
62 Ah / in the engine compartment |
Dynamo |
three-phase AC / 770 W |
Starter motor |
electrical / 1,4 kW |
Ignition |
electronic ignition system |
Fuel tank |
above the rear axle / 70 l |
Fuel supply |
electric supply pump |
Driven whells |
rear wheels |
Power transmission |
divided cardan shaft |
Frame desing |
self-supporting all-steel body |
Wheel suspension front |
triangle-wishbone / shock-absorber strut |
Wheel suspension rear |
multilink suspension, on demand with hydropneumatic level control |
Suspension front |
coil springs, torsion bar stabilizer |
Suspension rear |
coil springs, torsion bar type stabilizer |
Damper |
gas-pressure shock absorber struts / gas-pressure damper |
Steering |
ball-and-nut power steering |
Steering transm ratio |
16,21:1 / 3,3 steering wheel turns |
Breaking system |
braking system |
Breaking system |
hydraulic dual-circuit system with vacuum-operated brake servo unit, on demand with antilock device (since 02.88 standard); disc brakes front (since 09.88 intern. ventilated) and rear |
Parking breake |
parking brake |
Parking breake |
mechanical (foot-operated), effective on rear wheels |
Diamatre |
brake discs front / rear: 284 / 258 mm |
Wheels |
sheet steel-disc wheels, on demand light-alloy disc wheels |
Wheels rims |
6 1/2 J x 15 H 2 |
Tyres |
195/65 R 15 91 H |