| |
|
Limousines of the series 124
Mercedes-Benz type 300 D |
| Type |
300 D |
| Name |
300 D |
| Name |
Mercedes-Benz type 300 D |
| Short name |
300 D |
| Model |
W 124 D 30 |
| Production |
03.84/01.85 - 08.89 |
| Number produced |
altogether 131.647 (until 07.93) |
| Comments concerning the production period |
begin of production - pre-production batch / main production - end of production |
| Prices |
12.84: 39.672,00 DM
04.85: 40.960,20 DM
12.85: 41.712,60 DM
09.86: 42.864,00 DM
06.87: 44.118,00 DM
02.88: 45.087,00 DM
09.88: 46.797,00 DM
02.89: 47.766,00 DM |
| Wheelbase |
2800 mm |
| Track rear/front |
1497/1488 mm |
| Length |
4740 mm |
| Width |
1740 mm |
| Height |
1446 mm; since 11.88: 1431 mm |
| Smallest turning circle |
11,2 m |
| Chassis weight |
| Max. total weight |
1890 kg; since 12.86: 1910 kg; since 12.88: 1930 kg |
| Max. front axle weight |
910 kg; since 12.86: 925 kg; since 12.88: 935 kg |
| Max. rear axle weight |
980 kg; since 12.86: 985 kg; since 12.88: 995 kg |
| Max. load |
520 kg |
| Max. trailer weight braked |
1500 kg; since 05.89: 1900 kg |
| Max. trailer weight unbraked |
720 kg; since 12.86: 730 kg; since 12.88: 740 kg |
| Weight empty |
1370 kg; since 12.86: 1390 kg; since 12.88: 1410 kg |
| According to guideline |
DIN 70020 (with fuel, spare wheel and tool equipment) |
| Operating method |
four-stroke Diesel (with indirect injection) |
| Configuration |
front, parallel; upright |
| Type |
OM 603 D 30 / 603.912 |
| No. of cylinder/configuration |
6 / in line; 15ř inclination to the right |
| Bore x stroke |
87,0 x 84,0 mm |
| Total displacement |
2996 ccm (tax classification: 2975 ccm) |
| Compression ratio |
22,0 |
| Crankshaft bearing |
7 |
| Output |
109 hp / 80 kW at 4600 /min;~since 02.89: 113 hp / 83 kW at 4600 /min |
| Maximum torque |
185 Nm at 2800 /min; since 02.89: 191 Nm at 2800 - 3050 /min |
| No. of valves/configuration |
1 intake, 1 exhaust / overhead |
| Valve operation |
top camshaft |
| Camshaft drive |
duplex roller-type chain |
| Mixture formation |
indirect injection, mechanically controlled;~Bosch 6-plunger-type injection pump |
| Cooling |
water cooling / pump; 9 l water |
| Lubrication |
pressure circulation lubrication / 7,5 l oil |
| Electric system |
12 V |
| Battery |
72 Ah / in the engine compartment |
| Dynamo |
three-phase AC / 770 W |
| Starter motor |
electrical / 2,2 kW |
| Ignition |
compression ignition engine |
| Fuel tank |
above the rear axle / 70 l |
| Fuel supply |
piston pump at the injection pump |
| Driven whells |
rear wheels |
| Power transmission |
divided cardan shaft |
| Frame desing |
self-supporting all-steel body |
| Wheel suspension front |
triangle-wishbone / shock-absorber strut |
| Wheel suspension rear |
multilink suspension, on demand with hydropneumatic level control |
| Suspension front |
coil springs, torsion bar stabilizer |
| Suspension rear |
coil springs, torsion bar type stabilizer |
| Damper |
gas-pressure shock absorber struts / gas-pressure damper |
| Steering |
ball-and-nut power steering |
| Steering transm ratio |
15,44:1 / 3 steering wheel turns |
| Breaking system |
braking system |
| Breaking system |
hydraulic dual-circuit braking system with vacuum-operated brake ~servo unit, on demand with antilock device (since 09.88 standard);~disc brakes front and rear |
| Parking breake |
parking brake |
| Parking breake |
mechanical (foot-operated), effective on rear wheels |
| Diamatre |
brake discs front / rear: 284 / 258 mm |
| Wheels |
sheet steel-disc wheels, on demand light-alloy disc wheels |
| Wheels rims |
6 1/2 J x 15 H 2 |
| Tyres |
195/65 R 15 91 T |