{"id":3067,"date":"2023-11-19T13:32:29","date_gmt":"2023-11-19T12:32:29","guid":{"rendered":"https:\/\/mbci.mackuz.ovh\/?p=3067"},"modified":"2023-11-19T13:32:29","modified_gmt":"2023-11-19T12:32:29","slug":"removal-and-installation-of-immersion-tube-indicator","status":"publish","type":"post","link":"https:\/\/mbci.mackuz.ovh\/index.php\/2023\/11\/19\/removal-and-installation-of-immersion-tube-indicator\/","title":{"rendered":"Removal and installation of immersion tube indicator"},"content":{"rendered":"

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
47\u2014710 Removal and installation of immersion tube indicator<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
A. Model 116<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Tightening torque<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\n
Nm<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Immersion tube indicator<\/div>\n<\/div>\n<\/td>\n
\n
\n
35-43<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Removal<\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
1 Remove first aid kit and first aid kit mounting shell (arrow).<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
2\u00a0 \u00a0 Pull coupler (66) for fuel gage from immersion tube indicator (65) and protect with wire against slipping off.<\/div>\n
3\u00a0 \u00a0Unscrew immersion tube indicator.<\/div>\n
Note: <\/strong>Let immersion tube indicator run dry, if required.<\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Installation<\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
4 For installation proceed vice versa, while proceed\u00ading as follows:<\/div>\n
a) Use new rubber sealing ring.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
147-10610<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
47.8-710\/1 F3<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
b)\u00a0 Remove locking pin (arrow) prior to installing immersion tube indicator.<\/div>\n
c)\u00a0 Check fuel gage for function.<\/div>\n
d)\u00a0 Tighten immersion tube indicator to 35\u201443 Nm.<\/div>\n
e)\u00a0 Plug-on coupler for fuel gage.<\/div>\n
f)\u00a0 \u00a0Check for leaks.<\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
K37-10702<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
47.8-710\/2 F2<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
B. Model 123T-sedan<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Tightening torque<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\n
Nm<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Immersion tube indicator<\/div>\n<\/div>\n<\/td>\n
\n
\n
35-43<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Removal<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
1 Loosen trunk floor by turning tommy lock and remove.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
2 Remove storage shelf.<\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
3 Pull off coupler (66) for fuel gage and unscrew immersion tube indicator (65).<\/div>\n
Note: <\/strong>Let immersion tube indicator run dry, if re\u00adquired.<\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
47.8-710\/3 F 3<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Installation<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
4 For installation proceed vice versa as follows: a) Use new rubber sealing ring.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
147-10810<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
b)\u00a0 Prior to installation of immersion tube indicator, remove locking pin (arrow).<\/div>\n
c)\u00a0 Check fuel gage for function.<\/div>\n
d)\u00a0 Tighten immersion tube indicator to 35\u201443 Nm.<\/div>\n
e)\u00a0 Plug-on coupler for fuel gage.<\/div>\n
f)\u00a0 \u00a0Check for leaks.<\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
W7-W702<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
47.8-710\/4 F2<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
C. Model 126<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Tightening torque<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\n
Nm<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Immersion tube indicator<\/div>\n<\/div>\n<\/td>\n
\n
\n
35-43<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Removal<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
1<\/strong>\u00a0 \u00a0 Remove rear seat bench and backrest (refer to sec\u00adtion covering body).<\/div>\n
2\u00a0 \u00a0 Remove filler cap.<\/div>\n
3\u00a0 \u00a0Pull off coupler (66) and protect against slipping off.<\/div>\n
4\u00a0 \u00a0Unscrew immersion tube indicator (65).<\/div>\n
Note: <\/strong>Let immersion tube indicator run dry, if re\u00adquired.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Installation<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
5 For installation proceed vice versa as follows:<\/div>\n
a)\u00a0 \u00a0Use new rubber sealing ring.<\/div>\n
b)\u00a0 Prior to inserting a new immersion tube indicator, remove locking pin (arrow).<\/div>\n
c)\u00a0 Check fuel gage for function.<\/div>\n
d)\u00a0 Tighten immersion tube indicator to 35\u201443 Nm.<\/div>\n
e)\u00a0 \u00a0Plug-on coupler for fuel gage.<\/div>\n
f)\u00a0 \u00a0Check for leaks.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
K)7-10702<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
47.8-710\/5 F3<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

    47\u2014710 Removal and installation of immersion tube indicator   A. Model 116   Tightening torque Nm   Immersion tube indicator 35-43   Removal 1 Remove first aid kit and first aid kit mounting shell (arrow).   2\u00a0 \u00a0 Pull coupler (66) for fuel gage from immersion tube indicator (65) and protect with wire against slipping off. 3\u00a0 \u00a0Unscrew immersion tube indicator. Note: Let immersion tube indicator run dry, if required.   Installation 4 For installation proceed vice versa, while proceed\u00ading as follows: a) Use new rubber sealing ring.   147-10610   47.8-710\/1 F3       b)\u00a0 Remove locking pin (arrow) prior to installing immersion tube indicator. c)\u00a0 Check fuel gage for function. d)\u00a0 Tighten immersion tube indicator to 35\u201443 Nm. e)\u00a0 Plug-on coupler for fuel gage. f)\u00a0 \u00a0Check for leaks.   K37-10702   47.8-710\/2 F2       B. Model 123T-sedan   Tightening torque Nm   Immersion tube indicator 35-43   Removal 1 Loosen trunk floor by turning tommy lock and remove.   2 Remove storage shelf.   3 Pull off coupler (66) for fuel gage and unscrew immersion tube indicator (65). Note: Let immersion tube indicator run dry, if re\u00adquired.   47.8-710\/3 F 3         Installation 4 For installation proceed vice versa as follows: a) Use new rubber sealing ring.   147-10810   b)\u00a0 Prior to installation of immersion tube indicator, remove locking pin (arrow). c)\u00a0 Check fuel gage for function. d)\u00a0 Tighten immersion tube indicator to 35\u201443 Nm. e)\u00a0 Plug-on coupler for fuel gage. f)\u00a0 \u00a0Check for leaks.   W7-W702   47.8-710\/4 F2       C. Model 126   Tightening torque Nm   Immersion tube indicator 35-43   Removal 1\u00a0 \u00a0 Remove rear seat bench and backrest (refer to sec\u00adtion covering body). 2\u00a0 \u00a0 Remove filler cap. 3\u00a0 \u00a0Pull off coupler (66) and protect against slipping off. 4\u00a0 \u00a0Unscrew immersion tube indicator (65). Note: Let immersion tube indicator run dry, if re\u00adquired.   Installation 5 For installation proceed vice versa as follows: a)\u00a0 \u00a0Use new rubber sealing ring. b)\u00a0 Prior to inserting a new immersion tube indicator, remove locking pin (arrow). c)\u00a0 Check fuel gage for function. d)\u00a0 Tighten immersion tube indicator to 35\u201443 Nm. e)\u00a0 \u00a0Plug-on coupler for fuel gage. f)\u00a0 \u00a0Check for leaks. K)7-10702   47.8-710\/5 F3      <\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_crdt_document":"","footnotes":""},"categories":[58,44],"tags":[],"class_list":["post-3067","post","type-post","status-publish","format-standard","hentry","category-fuel-system-gas-tank-lines-evaporation-control","category-om617"],"aioseo_notices":[],"featured_image_src":null,"author_info":{"display_name":"mackuz","author_link":"https:\/\/mbci.mackuz.ovh\/index.php\/author\/mackuz\/"},"_links":{"self":[{"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/posts\/3067","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/comments?post=3067"}],"version-history":[{"count":1,"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/posts\/3067\/revisions"}],"predecessor-version":[{"id":3068,"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/posts\/3067\/revisions\/3068"}],"wp:attachment":[{"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/media?parent=3067"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/categories?post=3067"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/tags?post=3067"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}