{"id":3057,"date":"2023-11-19T13:22:45","date_gmt":"2023-11-19T12:22:45","guid":{"rendered":"https:\/\/mbci.mackuz.ovh\/?p=3057"},"modified":"2023-11-19T13:22:45","modified_gmt":"2023-11-19T12:22:45","slug":"removal-and-installation-of-engine-longitudinal-regulating-shaft-3","status":"publish","type":"post","link":"https:\/\/mbci.mackuz.ovh\/index.php\/2023\/11\/19\/removal-and-installation-of-engine-longitudinal-regulating-shaft-3\/","title":{"rendered":"Removal and installation of engine longitudinal regulating shaft"},"content":{"rendered":"

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
30-310 Removal and installation of engine longitudinal regulating shaft<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Note<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
When removing transmission, remove longitudinal regulating shaft, so that bearing on front wall is not damaged by tilting of engine.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
A. Model 116.120<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Removal<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
1\u00a0 \u00a0 Disconnect regulating rods.<\/div>\n
2\u00a0 \u00a0Turn longitudinal regulating shaft to the left until groove disengages from clip. Push longitudinal regulat\u00ading shaft to the rear and remove.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Installation<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
4\u00a0 \u00a0 For installation proceed vice versa. Grease bearing points as well as ball sockets of regulation with Moly-kote Longterm 2.<\/div>\n
5\u00a0 \u00a0Adjust throttle linkage (30-300).<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
30.8-310\/1 F3<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
B. Model 123.1<\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Removal<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
1\u00a0 \u00a0 Remove regulating rod (5) and lock (33).<\/div>\n
2\u00a0 \u00a0Slide longitudinal regulating shaft in forward direc\u00adtion out of bearing on front wall. Then remove toward the rear.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
1303″ 996 V1<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Installation<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
3\u00a0 \u00a0 For installation proceed vice versa. Grease bearing points as well as ball sockets of regulation with Moly-kote Longterm 2.<\/div>\n
4\u00a0 \u00a0Adjust throttle linkage (30-300).<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
30.8-310\/2 F3<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
C. Model 126.120<\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Removal<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
1\u00a0 \u00a0 Disconnect regulating rods (5 and 61).<\/div>\n
2\u00a0 \u00a0 Remove lock (84), corrugated washer (83) and plastic spacing ring (32).<\/div>\n
3\u00a0 \u00a0Push longitudinal regulating shaft (3) to the rear and remove.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Installation<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
4\u00a0 \u00a0 For installation proceed vice versa. Grease bearing points as well as ball sockets of regulation with Moly-kote Longterm 2.<\/div>\n
5\u00a0 \u00a0Adjust throttle linkage (30\u2014300).<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
30.8-310\/3 F3<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

    30-310 Removal and installation of engine longitudinal regulating shaft   Note   When removing transmission, remove longitudinal regulating shaft, so that bearing on front wall is not damaged by tilting of engine.   A. Model 116.120 Removal 1\u00a0 \u00a0 Disconnect regulating rods. 2\u00a0 \u00a0Turn longitudinal regulating shaft to the left until groove disengages from clip. Push longitudinal regulat\u00ading shaft to the rear and remove.     Installation   4\u00a0 \u00a0 For installation proceed vice versa. Grease bearing points as well as ball sockets of regulation with Moly-kote Longterm 2. 5\u00a0 \u00a0Adjust throttle linkage (30-300).   30.8-310\/1 F3       B. Model 123.1 Removal 1\u00a0 \u00a0 Remove regulating rod (5) and lock (33). 2\u00a0 \u00a0Slide longitudinal regulating shaft in forward direc\u00adtion out of bearing on front wall. Then remove toward the rear.   1303″ 996 V1   Installation   3\u00a0 \u00a0 For installation proceed vice versa. Grease bearing points as well as ball sockets of regulation with Moly-kote Longterm 2. 4\u00a0 \u00a0Adjust throttle linkage (30-300).   30.8-310\/2 F3       C. Model 126.120 Removal 1\u00a0 \u00a0 Disconnect regulating rods (5 and 61). 2\u00a0 \u00a0 Remove lock (84), corrugated washer (83) and plastic spacing ring (32). 3\u00a0 \u00a0Push longitudinal regulating shaft (3) to the rear and remove.     Installation   4\u00a0 \u00a0 For installation proceed vice versa. Grease bearing points as well as ball sockets of regulation with Moly-kote Longterm 2. 5\u00a0 \u00a0Adjust throttle linkage (30\u2014300).   30.8-310\/3 F3        <\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_crdt_document":"","footnotes":""},"categories":[44,57],"tags":[],"class_list":["post-3057","post","type-post","status-publish","format-standard","hentry","category-om617","category-throttle-control-om617"],"aioseo_notices":[],"featured_image_src":null,"author_info":{"display_name":"mackuz","author_link":"https:\/\/mbci.mackuz.ovh\/index.php\/author\/mackuz\/"},"_links":{"self":[{"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/posts\/3057","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/comments?post=3057"}],"version-history":[{"count":1,"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/posts\/3057\/revisions"}],"predecessor-version":[{"id":3058,"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/posts\/3057\/revisions\/3058"}],"wp:attachment":[{"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/media?parent=3057"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/categories?post=3057"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/tags?post=3057"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}