{"id":3024,"date":"2023-11-19T12:58:06","date_gmt":"2023-11-19T11:58:06","guid":{"rendered":"https:\/\/mbci.mackuz.ovh\/?p=3024"},"modified":"2023-11-19T12:58:06","modified_gmt":"2023-11-19T11:58:06","slug":"removal-and-installation-of-coolant-thermostat","status":"publish","type":"post","link":"https:\/\/mbci.mackuz.ovh\/index.php\/2023\/11\/19\/removal-and-installation-of-coolant-thermostat\/","title":{"rendered":"Removal and installation of coolant thermostat"},"content":{"rendered":"

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
20\u2014110 Removal and installation of coolant thermostat<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Tightening torques<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\n
Type<\/div>\n<\/div>\n<\/td>\n
\n
\n
Nm<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Screws for housing cover coolant thermostat<\/div>\n<\/div>\n<\/td>\n
\n
\n
9-11<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
116<\/div>\n<\/div>\n<\/td>\n
\n
\n
6-10<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Drain plug for radiator<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
123, 126<\/div>\n<\/div>\n<\/td>\n
\n
\n
1.5-21<\/sup>)<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
M This torque can be obtained by means of a washer or a coin.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Special tools<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Tester for cooling system<\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
\n
\n
001 589 48 21 00<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Radiator cap with hose for leak test<\/div>\n<\/div>\n<\/td>\n
\n
\n
605 589 00 25 00<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
7 mm socket on flexible shaft for hose clamps<\/div>\n<\/div>\n<\/td>\n
\n
\n
123 589 12 09 00<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Removal<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
1\u00a0 \u00a0 Drain coolant (20-010).<\/div>\n
2\u00a0 \u00a0Disconnect hose on coolant thermostat housing cover (arrow).<\/div>\n
3\u00a0 \u00a0Unscrew coolant thermostat housing cover.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
4 Remove coolant thermostat with seal out of cover.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
20\u2014110 Removal and installation of coolant thermostat<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Tightening torques<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\n
Type<\/div>\n<\/div>\n<\/td>\n
\n
\n
Nm<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Screws for housing cover coolant thermostat<\/div>\n<\/div>\n<\/td>\n
\n
\n
9-11<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
116<\/div>\n<\/div>\n<\/td>\n
\n
\n
6-10<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Drain plug for radiator<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
123, 126<\/div>\n<\/div>\n<\/td>\n
\n
\n
1.5-21<\/sup>)<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
M This torque can be obtained by means of a washer or a coin.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Special tools<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Tester for cooling system<\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
\n
\n
001 589 48 21 00<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Radiator cap with hose for leak test<\/div>\n<\/div>\n<\/td>\n
\n
\n
605 589 00 25 00<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
7 mm socket on flexible shaft for hose clamps<\/div>\n<\/div>\n<\/td>\n
\n
\n
123 589 12 09 00<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Removal<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
1\u00a0 \u00a0 Drain coolant (20-010).<\/div>\n
2\u00a0 \u00a0Disconnect hose on coolant thermostat housing cover (arrow).<\/div>\n
3\u00a0 \u00a0Unscrew coolant thermostat housing cover.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
4 Remove coolant thermostat with seal out of cover.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
5 Check seal for damage and replace, if required.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
20.8-110\/1 F2<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Installation<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Note: <\/strong>Replace damaged seal.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
6 Place seal on coolant thermostat.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n

\"om617<\/p>\n

\n
tss-w-m<\/div>\n<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
7\u00a0 \u00a0 Install coolant thermostat with seal in such a manner that arrow on thermostat points upwards.<\/div>\n
8\u00a0 \u00a0Screw on coolant thermostat housing cover, tighten to 9\u201411 Nm and connect hose.<\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
9\u00a0 \u00a0Add coolant (20-010).<\/div>\n
10\u00a0 \u00a0Pressure-test cooling system with tester (approx. 1 bar gage pressure).<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
20.8-110\/2 F2<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

„><\/p>\n

\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
5 Check seal for damage and replace, if required.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
20.8-110\/1 F2<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Installation<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Note: <\/strong>Replace damaged seal.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
6 Place seal on coolant thermostat.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n

\"om617<\/p>\n

\n
tss-w-m<\/div>\n<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
7\u00a0 \u00a0 Install coolant thermostat with seal in such a manner that arrow on thermostat points upwards.<\/div>\n
8\u00a0 \u00a0Screw on coolant thermostat housing cover, tighten to 9\u201411 Nm and connect hose.<\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
9\u00a0 \u00a0Add coolant (20-010).<\/div>\n
10\u00a0 \u00a0Pressure-test cooling system with tester (approx. 1 bar gage pressure).<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
20.8-110\/2 F2<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

    20\u2014110 Removal and installation of coolant thermostat   Tightening torques Type Nm   Screws for housing cover coolant thermostat 9-11   116 6-10   Drain plug for radiator   123, 126 1.5-21)   M This torque can be obtained by means of a washer or a coin.   Special tools   Tester for cooling system 001 589 48 21 00 Radiator cap with hose for leak test 605 589 00 25 00 7 mm socket on flexible shaft for hose clamps 123 589 12 09 00   Removal 1\u00a0 \u00a0 Drain coolant (20-010). 2\u00a0 \u00a0Disconnect hose on coolant thermostat housing cover (arrow). 3\u00a0 \u00a0Unscrew coolant thermostat housing cover.   4 Remove coolant thermostat with seal out of cover.     20\u2014110 Removal and installation of coolant thermostat   Tightening torques Type Nm   Screws for housing cover coolant thermostat 9-11   116 6-10   Drain plug for radiator   123, 126 1.5-21)   M This torque can be obtained by means of a washer or a coin.   Special tools   Tester for cooling system 001 589 48 21 00 Radiator cap with hose for leak test 605 589 00 25 00 7 mm socket on flexible shaft for hose clamps 123 589 12 09 00   Removal 1\u00a0 \u00a0 Drain coolant (20-010). 2\u00a0 \u00a0Disconnect hose on coolant thermostat housing cover (arrow). 3\u00a0 \u00a0Unscrew coolant thermostat housing cover.   4 Remove coolant thermostat with seal out of cover.   5 Check seal for damage and replace, if required.   20.8-110\/1 F2       Installation Note: Replace damaged seal. 6 Place seal on coolant thermostat.   tss-w-m   7\u00a0 \u00a0 Install coolant thermostat with seal in such a manner that arrow on thermostat points upwards. 8\u00a0 \u00a0Screw on coolant thermostat housing cover, tighten to 9\u201411 Nm and connect hose.   9\u00a0 \u00a0Add coolant (20-010). 10\u00a0 \u00a0Pressure-test cooling system with tester (approx. 1 bar gage pressure).   20.8-110\/2 F2         „>   5 Check seal for damage and replace, if required.   20.8-110\/1 F2       Installation Note: Replace damaged seal. 6 Place seal on coolant thermostat.   tss-w-m   7\u00a0 \u00a0 Install coolant thermostat with seal in such a manner that arrow on thermostat points upwards. 8\u00a0 \u00a0Screw on coolant thermostat housing cover, tighten to 9\u201411 Nm and connect hose.   9\u00a0 \u00a0Add coolant (20-010). 10\u00a0 \u00a0Pressure-test cooling system with tester (approx. 1 bar gage pressure).   20.8-110\/2 F2        <\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[55,44],"tags":[],"class_list":["post-3024","post","type-post","status-publish","format-standard","hentry","category-engine-cooling-om617","category-om617"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t