{"id":2953,"date":"2023-11-18T00:18:24","date_gmt":"2023-11-17T23:18:24","guid":{"rendered":"https:\/\/mbci.mackuz.ovh\/?p=2953"},"modified":"2023-11-18T00:18:24","modified_gmt":"2023-11-17T23:18:24","slug":"instructions-concerning-renewal-and-tensioning-of-v-belts","status":"publish","type":"post","link":"https:\/\/mbci.mackuz.ovh\/index.php\/2023\/11\/18\/instructions-concerning-renewal-and-tensioning-of-v-belts\/","title":{"rendered":"Instructions concerning renewal and tensioning of V-belts"},"content":{"rendered":"

 <\/p>\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
13\u2014335 Instructions concerning renewal and tensioning of V-belts<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Adjusting data<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
<\/div>\n

 <\/td>\n

\n
<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
V-belts (profile width in mm)<\/div>\n<\/div>\n<\/td>\n
\n
\n
New V-belts (KG scale on measuring instrument)<\/div>\n<\/div>\n<\/td>\n
\n
\n
Used V-belts (KG scale on measuring instrument)<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
9.5 12.5<\/div>\n<\/div>\n<\/td>\n
\n
\n
30 50<\/div>\n<\/div>\n<\/td>\n
\n
\n
20-25 40-45<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Conventional tool<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Measuring instrument (Krikit)<\/div>\n<\/div>\n<\/td>\n
\n
\n
e.g. made by Gates GmbH<\/div>\n
Gravener StraSe 191-193, D-4018 Langenfeld 2<\/div>\n
e.g. made by Gates Rubber Company<\/div>\n
999 S. Broadway, USA-80217 Denver\/Colorado<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Checking condition of V-belts<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Cracked, porous, burnt or worn V-belts should be replaced.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Checking tension<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
For handling of instrument, refer to operating instruc\u00adtions, renewing and tensioning V-belts (13\u2014340).<\/div>\n
The respective adjusting data refer to KG scale of measuring instrument (arrow).<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
13.8-335\/1 F2<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Used V-belts<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Check tension of V-belts and compare with values named in table for used V-belts (e.g. V-belt, profile width 9.5 mm = adjusting value 20\u201425) and reten-sion, if required.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Mounting and tensioning of new V-belts<\/strong><\/div>\n
Perfect mounting of a V-belt requires loosening of respective auxiliary unit or of tensioning device of V-belt to the extent that the belt can be easily mounted. In addition, the running surfaces for the V-belts on pulleys must be free of burr, rust and dirt.<\/div>\n
Keep free of oil, grease, chemicals. Do not use belt wax or similar agents. Subsequent optimal adjustment of belt tension (for adjusting values refer to table) serves to prevent complaints such as squeaking V-belts and low life.<\/div>\n
In scope of maintenance jobs, mount V-belts prior to engine checkup and tension to value for new V-belts <\/strong>named in table (e.g. V-belt, profile width 9.5 mm = adjusting value 30).<\/div>\n
If the V-belt tension is checked during final accept\u00adance or following a test drive, the value measured in such a case should be in agreement with the value named in table for used V-belts <\/strong>(e.g. V-belt with profile width 9.5 mm = adjusting value 20\u201425). If less, retension V-belt to this value.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
13.8-335\/2 F2<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

    13\u2014335 Instructions concerning renewal and tensioning of V-belts   Adjusting data     V-belts (profile width in mm) New V-belts (KG scale on measuring instrument) Used V-belts (KG scale on measuring instrument) 9.5 12.5 30 50 20-25 40-45   Conventional tool   Measuring instrument (Krikit) e.g. made by Gates GmbH Gravener StraSe 191-193, D-4018 Langenfeld 2 e.g. made by Gates Rubber Company 999 S. Broadway, USA-80217 Denver\/Colorado   Checking condition of V-belts   Cracked, porous, burnt or worn V-belts should be replaced.   Checking tension For handling of instrument, refer to operating instruc\u00adtions, renewing and tensioning V-belts (13\u2014340). The respective adjusting data refer to KG scale of measuring instrument (arrow).   13.8-335\/1 F2       Used V-belts   Check tension of V-belts and compare with values named in table for used V-belts (e.g. V-belt, profile width 9.5 mm = adjusting value 20\u201425) and reten-sion, if required.   Mounting and tensioning of new V-belts Perfect mounting of a V-belt requires loosening of respective auxiliary unit or of tensioning device of V-belt to the extent that the belt can be easily mounted. In addition, the running surfaces for the V-belts on pulleys must be free of burr, rust and dirt. Keep free of oil, grease, chemicals. Do not use belt wax or similar agents. Subsequent optimal adjustment of belt tension (for adjusting values refer to table) serves to prevent complaints such as squeaking V-belts and low life. In scope of maintenance jobs, mount V-belts prior to engine checkup and tension to value for new V-belts named in table (e.g. V-belt, profile width 9.5 mm = adjusting value 30). If the V-belt tension is checked during final accept\u00adance or following a test drive, the value measured in such a case should be in agreement with the value named in table for used V-belts (e.g. V-belt with profile width 9.5 mm = adjusting value 20\u201425). If less, retension V-belt to this value.   13.8-335\/2 F2        <\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[51,44],"tags":[],"class_list":["post-2953","post","type-post","status-publish","format-standard","hentry","category-belt-drives","category-om617"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t