{"id":2854,"date":"2023-11-17T23:03:03","date_gmt":"2023-11-17T22:03:03","guid":{"rendered":"https:\/\/mbci.mackuz.ovh\/?p=2854"},"modified":"2023-11-17T23:03:03","modified_gmt":"2023-11-17T22:03:03","slug":"renewing-ring-gear-of-flywheel","status":"publish","type":"post","link":"https:\/\/mbci.mackuz.ovh\/index.php\/2023\/11\/17\/renewing-ring-gear-of-flywheel\/","title":{"rendered":"Renewing ring gear of flywheel"},"content":{"rendered":"

 <\/p>\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
03\u2014430 Renewing ring gear of flywheel<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Data<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Lateral runout on ring gear<\/div>\n<\/div>\n<\/td>\n
\n
\n
max. 0.4<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Centering flange dia. for ring gear<\/div>\n<\/div>\n<\/td>\n
\n
\n
268.31-268.39<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Shrink-on temperature<\/div>\n<\/div>\n<\/td>\n
\n
\n
220 \u00b0C<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Annealing color<\/div>\n<\/div>\n<\/td>\n
\n
\n
yellow<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Conventional accessory<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Temperature measuring chalk<\/div>\n<\/div>\n<\/td>\n
\n
\n
e.g. from AW Faber-Castell D-8504 Stein bei Niirnberg color no. 2815\/220 (white) Thermochrom<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Note<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
The ring gear is hardened. To protect hardness, the temperature for hardening ring gear should not exceed 220 \u00b0C at any point. This can be done reliably only by means of a hot plate or a heating oven.<\/div>\n
An open flame may be used as an exception only. The flame should touch only the inside of the ring gear.<\/div>\n
Following renewal of a ring gear, the flywheel need not be balanced.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Renewal<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
1\u00a0 \u00a0 Center drill old ring gear and break up with a chisel or heat quickly and immediately remove.<\/div>\n
2\u00a0 \u00a0Clean mounting surface of ring gear on flywheel.<\/div>\n
3\u00a0 \u00a0 Uniformly heat new ring gear on a hot plate or in a heating oven.<\/div>\n
For this purpose, use temperature measuring chalk in accordance with instructions whenever possible.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
03.8-430\/1<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
4 Mount heated ring gear immediately on flywheel.<\/div>\n
Attention!<\/strong><\/div>\n
The tooth chamfer (arrow) should face starter motor.<\/div>\n
As a spare part, ring gears are available with chamfered teeth only.<\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
03.8-430\/2 F 2<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

    03\u2014430 Renewing ring gear of flywheel   Data   Lateral runout on ring gear max. 0.4 Centering flange dia. for ring gear 268.31-268.39 Shrink-on temperature 220 \u00b0C Annealing color yellow Conventional accessory     Temperature measuring chalk e.g. from AW Faber-Castell D-8504 Stein bei Niirnberg color no. 2815\/220 (white) Thermochrom   Note   The ring gear is hardened. To protect hardness, the temperature for hardening ring gear should not exceed 220 \u00b0C at any point. This can be done reliably only by means of a hot plate or a heating oven. An open flame may be used as an exception only. The flame should touch only the inside of the ring gear. Following renewal of a ring gear, the flywheel need not be balanced.   Renewal   1\u00a0 \u00a0 Center drill old ring gear and break up with a chisel or heat quickly and immediately remove. 2\u00a0 \u00a0Clean mounting surface of ring gear on flywheel. 3\u00a0 \u00a0 Uniformly heat new ring gear on a hot plate or in a heating oven. For this purpose, use temperature measuring chalk in accordance with instructions whenever possible.   03.8-430\/1       4 Mount heated ring gear immediately on flywheel. Attention! The tooth chamfer (arrow) should face starter motor. As a spare part, ring gears are available with chamfered teeth only.   03.8-430\/2 F 2        <\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[47,44],"tags":[],"class_list":["post-2854","post","type-post","status-publish","format-standard","hentry","category-crankshaft-assembly-om617","category-om617"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t