{"id":2814,"date":"2023-11-17T22:35:52","date_gmt":"2023-11-17T21:35:52","guid":{"rendered":"https:\/\/mbci.mackuz.ovh\/?p=2814"},"modified":"2023-11-17T22:35:52","modified_gmt":"2023-11-17T21:35:52","slug":"removal-and-installation-of-front-cylinder-crankcase-cover","status":"publish","type":"post","link":"https:\/\/mbci.mackuz.ovh\/index.php\/2023\/11\/17\/removal-and-installation-of-front-cylinder-crankcase-cover\/","title":{"rendered":"Removal and installation of front cylinder crankcase cover"},"content":{"rendered":"

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
01\u2014215 Removal and installation of front cylinder crankcase cover<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Tightening torques<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\n
Nm<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Screw M 18 x 1.5 x 45 on crankshaft<\/div>\n<\/div>\n<\/td>\n
\n
\n
270-330<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Screws M 8 x 30<\/div>\n<\/div>\n<\/td>\n
\n
\n
35<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Drain plug radiator<\/div>\n<\/div>\n<\/td>\n
\n
\n
Model 116.120<\/div>\n<\/div>\n<\/td>\n
\n
\n
6-10<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
<\/div>\n

 <\/td>\n

\n
<\/div>\n

 <\/td>\n

\n
<\/div>\n

 <\/td>\n

\n
\n
Model<\/div>\n<\/div>\n<\/td>\n
\n
\n
123,<\/div>\n<\/div>\n<\/td>\n
\n
\n
126.<\/div>\n<\/div>\n<\/td>\n
\n
\n
120<\/div>\n<\/div>\n<\/td>\n
\n
\n
1.5-2<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Special tools<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
<\/div>\n

 <\/td>\n

\n
<\/div>\n

 <\/td>\n

\n
<\/div>\n

 <\/td>\n

\n
<\/div>\n

 <\/td>\n

\n
<\/div>\n

 <\/td>\n

\n
<\/div>\n

 <\/td>\n

\n
<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Socket 27 mm,<\/div>\n<\/div>\n<\/td>\n
\n
\n
1\/2″<\/div>\n<\/div>\n<\/td>\n
\n
\n
square<\/div>\n<\/div>\n<\/td>\n
\n
<\/div>\n

 <\/td>\n

\n
<\/div>\n

 <\/td>\n

\n
<\/div>\n

 <\/td>\n

\n
<\/div>\n

 <\/td>\n

\n
\n
001 589 65 09 00<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Torque wrench 150\u2014500 Nm, 3\/4″ square<\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
\n
\n
001 589 31 21 00<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Detent<\/div>\n<\/div>\n<\/td>\n
\n
\n
110 589 00 40 00<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Puller for balancing disc<\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
\n
\n
116 589 10 33 00<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Installation tool for radial sealing ring<\/div>\n<\/div>\n<\/td>\n
\n
\n
130 589 00 61 00<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Sleeve for centering front cover and oil pan<\/div>\n<\/div>\n<\/td>\n
\n
\n
617 589 00 14 00<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Conventional tool<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Connection 3\/4″ square socket to 1\/2″ square head<\/div>\n<\/div>\n<\/td>\n
\n
\n
e.g. made by Hazet, D-5630 Remscheid order no. 1058 R-1<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Removal<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
1\u00a0 \u00a0 Remove pulley, vibration damper and balancing disc (03-340).<\/div>\n
2\u00a0 \u00a0 Remove front crankshaft radial sealing ring (03-324).<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
01.8-215\/1 F2<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
3\u00a0 \u00a0 Unscrew cover and remove.<\/div>\n
4\u00a0 \u00a0Thoroughly clean sealing surfaces of cover and on oil pan top.<\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Installation<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
5 Slip sleeve for centering cover on crankshaft journal.<\/div>\n
Attention!<\/strong><\/div>\n
If except for the cover, the complete oil pan has also been installed, reinstall oil pan again first. For this purpose, place sleeve on crankshaft journal.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
6\u00a0 \u00a0Coat all sealing surfaces with sealing compound, part no. 001 989 46 20.<\/div>\n
7\u00a0 \u00a0 Position cover and screw down.<\/div>\n
Attention!<\/strong><\/div>\n
Tighten screws in oil pan first (arrows).<\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
8\u00a0 \u00a0 Remove sleeve. If sleeve cannot be removed, insert mandrel into cross hole and turn out.<\/div>\n
9\u00a0 \u00a0 Install new crankshaft radial sealing ring (03\u2014324).<\/div>\n
10\u00a0 \u00a0 Install pulley, vibration damper and balancing disc (03-340).<\/div>\n<\/div>\n<\/td>\n
\n
\"om617<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
01.8-215\/2 F2<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

    01\u2014215 Removal and installation of front cylinder crankcase cover   Tightening torques Nm   Screw M 18 x 1.5 x 45 on crankshaft 270-330   Screws M 8 x 30 35   Drain plug radiator Model 116.120 6-10         Model 123, 126. 120 1.5-2 Special tools               Socket 27 mm, 1\/2″ square         001 589 65 09 00   Torque wrench 150\u2014500 Nm, 3\/4″ square 001 589 31 21 00 Detent 110 589 00 40 00   Puller for balancing disc 116 589 10 33 00 Installation tool for radial sealing ring 130 589 00 61 00 Sleeve for centering front cover and oil pan 617 589 00 14 00   Conventional tool   Connection 3\/4″ square socket to 1\/2″ square head e.g. made by Hazet, D-5630 Remscheid order no. 1058 R-1   Removal   1\u00a0 \u00a0 Remove pulley, vibration damper and balancing disc (03-340). 2\u00a0 \u00a0 Remove front crankshaft radial sealing ring (03-324).   01.8-215\/1 F2       3\u00a0 \u00a0 Unscrew cover and remove. 4\u00a0 \u00a0Thoroughly clean sealing surfaces of cover and on oil pan top.   Installation 5 Slip sleeve for centering cover on crankshaft journal. Attention! If except for the cover, the complete oil pan has also been installed, reinstall oil pan again first. For this purpose, place sleeve on crankshaft journal.   6\u00a0 \u00a0Coat all sealing surfaces with sealing compound, part no. 001 989 46 20. 7\u00a0 \u00a0 Position cover and screw down. Attention! Tighten screws in oil pan first (arrows).   8\u00a0 \u00a0 Remove sleeve. If sleeve cannot be removed, insert mandrel into cross hole and turn out. 9\u00a0 \u00a0 Install new crankshaft radial sealing ring (03\u2014324). 10\u00a0 \u00a0 Install pulley, vibration damper and balancing disc (03-340).   01.8-215\/2 F2        <\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_crdt_document":"","footnotes":""},"categories":[46,44],"tags":[],"class_list":["post-2814","post","type-post","status-publish","format-standard","hentry","category-crankcase-and-cylinder-head","category-om617"],"aioseo_notices":[],"featured_image_src":null,"author_info":{"display_name":"mackuz","author_link":"https:\/\/mbci.mackuz.ovh\/index.php\/author\/mackuz\/"},"_links":{"self":[{"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/posts\/2814","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/comments?post=2814"}],"version-history":[{"count":1,"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/posts\/2814\/revisions"}],"predecessor-version":[{"id":2815,"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/posts\/2814\/revisions\/2815"}],"wp:attachment":[{"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/media?parent=2814"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/categories?post=2814"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/mbci.mackuz.ovh\/index.php\/wp-json\/wp\/v2\/tags?post=2814"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}