{"id":2708,"date":"2023-11-14T21:58:57","date_gmt":"2023-11-14T20:58:57","guid":{"rendered":"https:\/\/mbci.mackuz.ovh\/?p=2708"},"modified":"2023-11-14T21:58:57","modified_gmt":"2023-11-14T20:58:57","slug":"removal-and-installation-of-thermostat-in-oil-filter-upper-section","status":"publish","type":"post","link":"https:\/\/mbci.mackuz.ovh\/index.php\/2023\/11\/14\/removal-and-installation-of-thermostat-in-oil-filter-upper-section\/","title":{"rendered":"Removal and installation of thermostat in oil filter upper section"},"content":{"rendered":"

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
18\u2014125 Removal and installation of thermostat in oil filter upper section<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Tightening torques<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\n
Nm<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Closing plug oil thermostc<\/div>\n<\/div>\n<\/td>\n
\n
\n
120-140<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Oil drain plug on air oil cooler, models 107, 114, <\/strong>116<\/div>\n<\/div>\n<\/td>\n
\n
\n
30-35<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Attention!<\/strong><\/div>\n
A well functioning thermostat may only be removed at temperatures below 60\u00b0C, <\/strong>since otherwise the pressure pin will be pressed out.<\/div>\n
Pressure pin (1) must never be pulled out of wax thermostat (2), since otherwise the function cannot be guaranteed.<\/div>\n<\/div>\n<\/td>\n
\n
\"m110<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Models 107,114,116<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\"m110<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
8 Plug<\/div>\n
10\u00a0Control valve<\/div>\n
11\u00a0 Thermostat<\/div>\n
12\u00a0Spring<\/div>\n
13\u00a0Seal<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Removal<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\"m110<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
1\u00a0 \u00a0 Unscrew plug (arrow) and catch escaping engine oil.<\/div>\n
2\u00a0 \u00a0Remove thermostat (11) with control valve (10) and spring (12).<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
18.2-125\/1 F3<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Installation<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
3\u00a0 \u00a0Guide thermostat (11) with control valve (10) and spring (12) into filter upper section and position spring in housing by turning the control valve.<\/div>\n
4\u00a0 \u00a0Torque plug to 120\u2014140 <\/strong>Nm.<\/div>\n
5\u00a0 \u00a0Check function of thermostat (18-120) and check plug for leaks.<\/div>\n
6\u00a0 \u00a0Correct oil level.<\/div>\n<\/div>\n<\/td>\n
\n
\n

\"m110<\/p>\n

\n
1183 -67ttk<\/div>\n<\/div>\n<\/div>\n<\/td>\n
\n
\n
2 3 4 5 6 -7<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Model 123 and models 107,116 with continuous fuel<\/strong><\/div>\n
injection<\/strong><\/div>\n
Model 116.020 2nd version and Model 126<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\n
15 14 13<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
11\u00a0 Plug<\/div>\n
12\u00a0Seal<\/div>\n
13\u00a0Thermostat<\/div>\n
14\u00a0Control valve<\/div>\n
15\u00a0Spring<\/div>\n<\/div>\n<\/td>\n
\n
\n
12 11<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
8 9 10<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Removal<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\"m110<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
1\u00a0 \u00a0 Unscrew plug (arrow) and catch escaping engine oil.<\/div>\n
2\u00a0 \u00a0 Remove thermostat (13) with control valve (14) and spring (15).<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Installation<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
3\u00a0 \u00a0Guide thermostat (13) with control valve (14) and spring (15) into filter upper section.<\/div>\n
4\u00a0 \u00a0Torque plug (11) to 120-140 Nm.<\/div>\n
5\u00a0 \u00a0Check function of thermostat (18-120) and plug for leaks.<\/div>\n
6\u00a0 \u00a0Correct oil level.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
18.2-125\/2 F3<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

    18\u2014125 Removal and installation of thermostat in oil filter upper section   Tightening torques Nm   Closing plug oil thermostc 120-140   Oil drain plug on air oil cooler, models 107, 114, 116 30-35   Attention! A well functioning thermostat may only be removed at temperatures below 60\u00b0C, since otherwise the pressure pin will be pressed out. Pressure pin (1) must never be pulled out of wax thermostat (2), since otherwise the function cannot be guaranteed.   Models 107,114,116 8 Plug 10\u00a0Control valve 11\u00a0 Thermostat 12\u00a0Spring 13\u00a0Seal   Removal 1\u00a0 \u00a0 Unscrew plug (arrow) and catch escaping engine oil. 2\u00a0 \u00a0Remove thermostat (11) with control valve (10) and spring (12).   18.2-125\/1 F3       Installation   3\u00a0 \u00a0Guide thermostat (11) with control valve (10) and spring (12) into filter upper section and position spring in housing by turning the control valve. 4\u00a0 \u00a0Torque plug to 120\u2014140 Nm. 5\u00a0 \u00a0Check function of thermostat (18-120) and check plug for leaks. 6\u00a0 \u00a0Correct oil level. 1183 -67ttk 2 3 4 5 6 -7 Model 123 and models 107,116 with continuous fuel injection Model 116.020 2nd version and Model 126 15 14 13 11\u00a0 Plug 12\u00a0Seal 13\u00a0Thermostat 14\u00a0Control valve 15\u00a0Spring 12 11 8 9 10   Removal 1\u00a0 \u00a0 Unscrew plug (arrow) and catch escaping engine oil. 2\u00a0 \u00a0 Remove thermostat (13) with control valve (14) and spring (15).   Installation   3\u00a0 \u00a0Guide thermostat (13) with control valve (14) and spring (15) into filter upper section. 4\u00a0 \u00a0Torque plug (11) to 120-140 Nm. 5\u00a0 \u00a0Check function of thermostat (18-120) and plug for leaks. 6\u00a0 \u00a0Correct oil level.   18.2-125\/2 F3          <\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[39,27],"tags":[],"class_list":["post-2708","post","type-post","status-publish","format-standard","hentry","category-engine-lubrication-oil-cooler","category-m110"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t