{"id":2654,"date":"2023-11-14T21:13:24","date_gmt":"2023-11-14T20:13:24","guid":{"rendered":"https:\/\/mbci.mackuz.ovh\/?p=2654"},"modified":"2023-11-14T21:13:24","modified_gmt":"2023-11-14T20:13:24","slug":"removal-and-installation-of-thermostat-for-intake-air-preheater","status":"publish","type":"post","link":"https:\/\/mbci.mackuz.ovh\/index.php\/2023\/11\/14\/removal-and-installation-of-thermostat-for-intake-air-preheater\/","title":{"rendered":"Removal and installation of thermostat for intake air preheater"},"content":{"rendered":"

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
09\u2014405 Removal and installation of thermostat for intake air preheater<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Testing and adjusting value<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Thermostat, dimension „a”<\/em><\/div>\n<\/div>\n<\/td>\n
\n
\n
7\u20148 mm<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
A. Knecht version<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Removal<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\"m110<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
1\u00a0 \u00a0 Compress compression spring (5) and push actuating bolt (9) from air valve shaft (8) and out of fastening eye.<\/div>\n
2\u00a0 \u00a0 Pull actuating bolt (9) together with guide sleeve (4) out of actuating pin of thermostat.<\/div>\n
3\u00a0 \u00a0 Unscrew square nut (3) and remove air filter cover.<\/div>\n
4\u00a0 \u00a0 Remove thermostat from inside out of intake pipe.<\/div>\n
Attention!<\/strong><\/div>\n
Do not turn or push out plastic fastening nut (2).<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Installation<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
5\u00a0 \u00a0Screw thermostat (1) from inside into plastic fastening nut (2) until dimension „a” = 7\u20148 mm <\/strong>is attained. Lock thermostat by means of square counternut (3).<\/div>\n
6\u00a0 \u00a0 Install actuating bolt (9) with guide sleeve (4) and compression spring (5).<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
B. Mann und Hummel version<\/div>\n<\/div>\n<\/td>\n
\n
\"m110<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Removal<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
1\u00a0 \u00a0 Push guide sleeve (3) against spring (4) and disconnect from pressure pin.<\/div>\n
2\u00a0 \u00a0 Remove air filter cover. Unscrew hex nut (2), unscrew thermostat from inside out of air filter housing.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
09.2 lb-405\/1<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Installation<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
3 Install thermostat in vice versa sequence and set dimension „a”.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
09.2 lb-405\/2<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

    09\u2014405 Removal and installation of thermostat for intake air preheater   Testing and adjusting value   Thermostat, dimension „a” 7\u20148 mm   A. Knecht version   Removal 1\u00a0 \u00a0 Compress compression spring (5) and push actuating bolt (9) from air valve shaft (8) and out of fastening eye. 2\u00a0 \u00a0 Pull actuating bolt (9) together with guide sleeve (4) out of actuating pin of thermostat. 3\u00a0 \u00a0 Unscrew square nut (3) and remove air filter cover. 4\u00a0 \u00a0 Remove thermostat from inside out of intake pipe. Attention! Do not turn or push out plastic fastening nut (2).   Installation   5\u00a0 \u00a0Screw thermostat (1) from inside into plastic fastening nut (2) until dimension „a” = 7\u20148 mm is attained. Lock thermostat by means of square counternut (3). 6\u00a0 \u00a0 Install actuating bolt (9) with guide sleeve (4) and compression spring (5).   B. Mann und Hummel version Removal 1\u00a0 \u00a0 Push guide sleeve (3) against spring (4) and disconnect from pressure pin. 2\u00a0 \u00a0 Remove air filter cover. Unscrew hex nut (2), unscrew thermostat from inside out of air filter housing.   09.2 lb-405\/1       Installation   3 Install thermostat in vice versa sequence and set dimension „a”.   09.2 lb-405\/2        <\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[35,27],"tags":[],"class_list":["post-2654","post","type-post","status-publish","format-standard","hentry","category-air-intake","category-m110"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t