{"id":2615,"date":"2023-11-14T20:21:47","date_gmt":"2023-11-14T19:21:47","guid":{"rendered":"https:\/\/mbci.mackuz.ovh\/?p=2615"},"modified":"2023-11-14T20:21:47","modified_gmt":"2023-11-14T19:21:47","slug":"removal-and-installation-of-mixture-controller-with-air-guide-housing","status":"publish","type":"post","link":"https:\/\/mbci.mackuz.ovh\/index.php\/2023\/11\/14\/removal-and-installation-of-mixture-controller-with-air-guide-housing\/","title":{"rendered":"Removal and installation of mixture controller with air guide housing"},"content":{"rendered":"

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
07.3\u2014225 Removal and installation of mixture controller with air guide housing<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Tightening torques<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\n
Nm<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Hex. nuts mixture controller to intake manifold (rubber buffer)<\/div>\n<\/div>\n<\/td>\n
\n
\n
9-10<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Injection lines and fuel lines to fuel distributor (reference value)<\/div>\n<\/div>\n<\/td>\n
\n
\n
10-12<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Injection lines to injection valves (reference value)<\/div>\n<\/div>\n<\/td>\n
\n
\n
10-15<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Special tool<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Torque wrench 1\/4″ square, 4\u201416 Nm<\/div>\n<\/div>\n<\/td>\n
\n
\"m110<\/div>\n<\/td>\n
\n
\n
000 589 67 21 00<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Removal<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\"m110<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
1\u00a0 \u00a0 Remove air cleaner.<\/div>\n
2\u00a0 \u00a0Unscrew all fuel and injection lines on fuel distri\u00adbutor and on injection valves. Catch fuel with a rag.<\/div>\n
Close fuel feed and return flow line blind.<\/div>\n
3\u00a0 \u00a0Pull electric connecting cables, to the extent instal\u00adled, from safety switch.<\/div>\n
4\u00a0 \u00a0Loosen hose clamp on rubber sleeve between air guide housing and throttle valve housing.<\/div>\n
5\u00a0 \u00a0Unscrew both hex. nuts on rubber buffers.<\/div>\n
6\u00a0 \u00a0Lift off mixture controller with air guide housing, while pulling off idle air hose.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
07.3.2 Ma\u2014225\/1 F2<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Installation<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
7\u00a0 \u00a0For installation proceed vice versa.<\/div>\n
8\u00a0 \u00a0Tighten both hex. nuts to specified tightening torques by means of a torque wrench.<\/div>\n
9\u00a0 \u00a0Connect injection lines and fuel lines, while paying attention to tightening torques as reference values.<\/div>\n
Attention!<\/strong><\/div>\n
When tightening injection lines and fuel lines, apply counterhold to injection valves as well as to double thread connections on fuel distributor.<\/div>\n
10\u00a0 \u00a0 Run engine and check all fuel connections for leaks.<\/div>\n
11\u00a0 \u00a0 Adjust idle speed (07.3-100).<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
07.3.2 lla-225\/2 F2<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

    07.3\u2014225 Removal and installation of mixture controller with air guide housing   Tightening torques Nm   Hex. nuts mixture controller to intake manifold (rubber buffer) 9-10   Injection lines and fuel lines to fuel distributor (reference value) 10-12   Injection lines to injection valves (reference value) 10-15   Special tool   Torque wrench 1\/4″ square, 4\u201416 Nm 000 589 67 21 00   Removal 1\u00a0 \u00a0 Remove air cleaner. 2\u00a0 \u00a0Unscrew all fuel and injection lines on fuel distri\u00adbutor and on injection valves. Catch fuel with a rag. Close fuel feed and return flow line blind. 3\u00a0 \u00a0Pull electric connecting cables, to the extent instal\u00adled, from safety switch. 4\u00a0 \u00a0Loosen hose clamp on rubber sleeve between air guide housing and throttle valve housing. 5\u00a0 \u00a0Unscrew both hex. nuts on rubber buffers. 6\u00a0 \u00a0Lift off mixture controller with air guide housing, while pulling off idle air hose.   07.3.2 Ma\u2014225\/1 F2       Installation   7\u00a0 \u00a0For installation proceed vice versa. 8\u00a0 \u00a0Tighten both hex. nuts to specified tightening torques by means of a torque wrench. 9\u00a0 \u00a0Connect injection lines and fuel lines, while paying attention to tightening torques as reference values. Attention! When tightening injection lines and fuel lines, apply counterhold to injection valves as well as to double thread connections on fuel distributor. 10\u00a0 \u00a0 Run engine and check all fuel connections for leaks. 11\u00a0 \u00a0 Adjust idle speed (07.3-100).   07.3.2 lla-225\/2 F2        <\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[27,33],"tags":[],"class_list":["post-2615","post","type-post","status-publish","format-standard","hentry","category-m110","category-mechanical-gazoline-injection-system-cis"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t