{"id":2524,"date":"2023-11-13T22:35:46","date_gmt":"2023-11-13T21:35:46","guid":{"rendered":"https:\/\/mbci.mackuz.ovh\/?p=2524"},"modified":"2023-11-13T22:35:46","modified_gmt":"2023-11-13T21:35:46","slug":"checking-and-correcting-choke-housing-mark","status":"publish","type":"post","link":"https:\/\/mbci.mackuz.ovh\/index.php\/2023\/11\/13\/checking-and-correcting-choke-housing-mark\/","title":{"rendered":"Checking and correcting choke housing mark"},"content":{"rendered":"

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
07.2\u2014142 Checking and correcting choke housing mark<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Testing and adjusting values<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Distance „a” <\/em>between choke housing and driver (197)<\/div>\n<\/div>\n<\/td>\n
\n
\n
approx. 1.0 mm<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Choke cover preload<\/div>\n<\/div>\n<\/td>\n
\n
\n
to mark<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Checking, correcting<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
\"m110<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
1\u00a0 \u00a0 Check whether driver (196 and 197) is at right angle in relation to choke housing and bend lever accordingly, if required.<\/div>\n
2\u00a0 \u00a0Operate throttle valve lever by half, push driver (196 or 197) to the left up to stop.<\/div>\n
3\u00a0 \u00a0Check whether choke valve is closed free of play and distance „a” <\/em>between driver (197) and choke housing amounts to approx. 1.0 mm.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
4 Disconnect choke rod, if required, and bend as needed.<\/div>\n
Attention!<\/strong><\/div>\n
To avoid distortion of driver (196), support choke rod.<\/div>\n<\/div>\n<\/td>\n
\n
\"m110<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
5 Actuate throttle valve lever by half. Push driver (194 or 196) to the left up to stop.<\/div>\n<\/div>\n<\/td>\n
\n
\"m110<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Rebending choke rod<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
07.2.2 la\u2014142\/1<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
6 Check marking notch (arrow) in extension of driver (194 or 196) and punch in new notch, if required.<\/div>\n<\/div>\n<\/td>\n
\n
\"m110<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
07.2.2 la-142\/2<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

    07.2\u2014142 Checking and correcting choke housing mark   Testing and adjusting values   Distance „a” between choke housing and driver (197) approx. 1.0 mm   Choke cover preload to mark   Checking, correcting 1\u00a0 \u00a0 Check whether driver (196 and 197) is at right angle in relation to choke housing and bend lever accordingly, if required. 2\u00a0 \u00a0Operate throttle valve lever by half, push driver (196 or 197) to the left up to stop. 3\u00a0 \u00a0Check whether choke valve is closed free of play and distance „a” between driver (197) and choke housing amounts to approx. 1.0 mm.   4 Disconnect choke rod, if required, and bend as needed. Attention! To avoid distortion of driver (196), support choke rod.   5 Actuate throttle valve lever by half. Push driver (194 or 196) to the left up to stop. Rebending choke rod   07.2.2 la\u2014142\/1       6 Check marking notch (arrow) in extension of driver (194 or 196) and punch in new notch, if required.   07.2.2 la-142\/2        <\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[32,27],"tags":[],"class_list":["post-2524","post","type-post","status-publish","format-standard","hentry","category-carburetor-fuel-pump-throttle-linkage","category-m110"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t