{"id":2335,"date":"2023-11-08T19:41:11","date_gmt":"2023-11-08T19:41:11","guid":{"rendered":"https:\/\/mbci.mackuz.ovh\/?p=2335"},"modified":"2023-11-08T19:41:11","modified_gmt":"2023-11-08T19:41:11","slug":"facing-camshaft-housing","status":"publish","type":"post","link":"https:\/\/mbci.mackuz.ovh\/index.php\/2023\/11\/08\/facing-camshaft-housing\/","title":{"rendered":"Facing camshaft housing"},"content":{"rendered":"

 <\/p>\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
01-472 Facing camshaft housing<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

Facing camshaft housing<\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Data<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Total height of new camshaft housing<\/div>\n<\/div>\n<\/td>\n
\n
\n
104.8-105.0<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Min. height after machining<\/div>\n<\/div>\n<\/td>\n
\n
\n
104.0<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Permissible deviation from parallel between upper and lower parting surface in longitudinal direction<\/div>\n<\/div>\n<\/td>\n
\n
\n
0.1<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Mean height of roughness of parting surfaces<\/div>\n<\/div>\n<\/td>\n
\n
\n
0.006-0.014<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Conventional tools<\/strong><\/div>\n<\/div>\n<\/td>\n
\n
<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Surface grinding machine with milling equipment for light alloy surfaces<\/div>\n<\/div>\n<\/td>\n
\n
\n
e.g. made by Ruaro u. Fi., Schio\/ltaly Scledum, type RTY<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Knife-edged straightedge approx. 750 mm long<\/div>\n<\/div>\n<\/td>\n
\n
<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/td>\n<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Note<\/strong><\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
The camshaft housing may only be faced, if mechanical damage is visible on the mating surfaces.<\/div>\n
A distorted camshaft housing will align with the cyl\u00adinder head when tightened.<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
Only 0.4 <\/strong>mm <\/em>may be machined off of the camshaft housing mating surfaces to the cylinder head or cyl\u00adinder head cover. The same amount of material must be removed from the bearing surfaces for the gaskets at <\/em>the spark plugs (2) as was machined from the mating surface to the cylinder head cover (1).<\/div>\n
If the camshaft housing was faced, the timing must be adjusted (05-215).<\/div>\n<\/div>\n<\/td>\n
\n
\"m110<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n\n
\n
01.2-472\/1 F3<\/div>\n<\/div>\n<\/td>\n
<\/td>\n<\/tr>\n
<\/td>\n\n
\n
<\/div>\n<\/div>\n

 <\/td>\n

<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

    01-472 Facing camshaft housing Facing camshaft housing Data   Total height of new camshaft housing 104.8-105.0 Min. height after machining 104.0 Permissible deviation from parallel between upper and lower parting surface in longitudinal direction 0.1 Mean height of roughness of parting surfaces 0.006-0.014 Conventional tools   Surface grinding machine with milling equipment for light alloy surfaces e.g. made by Ruaro u. Fi., Schio\/ltaly Scledum, type RTY Knife-edged straightedge approx. 750 mm long     Note   The camshaft housing may only be faced, if mechanical damage is visible on the mating surfaces. A distorted camshaft housing will align with the cyl\u00adinder head when tightened.   Only 0.4 mm may be machined off of the camshaft housing mating surfaces to the cylinder head or cyl\u00adinder head cover. The same amount of material must be removed from the bearing surfaces for the gaskets at the spark plugs (2) as was machined from the mating surface to the cylinder head cover (1). If the camshaft housing was faced, the timing must be adjusted (05-215).   01.2-472\/1 F3            <\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[29,27],"tags":[],"class_list":["post-2335","post","type-post","status-publish","format-standard","hentry","category-engine-removal-and-installation-ventilation-cran","category-m110"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t