30—330 Removal and installation of accelerator pedal
 
 

 
 
A. Model 116.120 and model 123.193 1 st version
 
 

 
 
Removal
om617 - 0502-1.jpg
 
 
1 Compress spreader clip (arrow) behind accelerator pedal and pull out.
 
 

 
 
Installation
 
 

 
 
2 During installation, make sure that spreader clip is reliably engaging.
 
 

 
 
B. Model 123.193 2nd version and model 126.120
 
 

 
 
Removal
om617 - 0502-2.jpg
 
 
1 Compress spreader clip (arrow) behind accelerator pedal and pull out.
 
 

 
 
30.8-330/1 F 3
 
 

 
       

 

       
 

 
 
2   Slide accelerator pedal in upward direction and rotate by 180°.
3   Pull off accelerator pedal in downward direction, lug (arrow) on accelerator pedal lever should be in alignment with groove in accelerator pedal.
om617 - 0503-1.jpg
 
 

 
 
107-17214
 
 

 
 
Installation
 
 

 
 
4 For installation proceed vice versa, making sure that spreader clip is reliably engaging.
The connection from accelerator pedal lever to accele­rator pedal is maintenance-free and requires no lubri­cation.
 
 

 
 
30.8-330/2