| |
|
T-Models of the series 202
Mercedes-Benz type C 43 AMG T-Limousine |
| Type |
C 43 AMG T-Limousine |
| Name |
C 43 AMG T-Limousine |
| Name |
Mercedes-Benz type C 43 AMG T-Limousine |
| Short name |
C 43 AMG T-Limousine |
| Model |
S 202 E 43 |
| Production |
since 09.97 |
| Number produced |
in production |
| Comments concerning the production period |
|
| Prices |
09.97: 117.127,50 DM
|
| Wheelbase |
2690 mm |
| Track rear/front |
1509/1483 mm |
| Length |
4516 mm |
| Width |
1723 mm |
| Height |
1431 mm |
| Smallest turning circle |
10,74 m |
| Chassis weight |
| Max. total weight |
2010 kg |
| Max. front axle weight |
970 kg |
| Max. rear axle weight |
1070 kg |
| Max. load |
400 kg |
| Max. trailer weight braked |
|
| Max. trailer weight unbraked |
|
| Weight empty |
1610 kg |
| According to guideline |
EG 92/21 (with driver, 68 kg, and pack, 7 kg; tank to 90 % filled) |
| Operating method |
four-stroke Otto (w. exhaust pipe injection, exh.gas purif. plant w. contr. 3-way catalizer) |
| Configuration |
front, longitudinal; vertical |
| Type |
M 113 E 43 / 113.944 |
| No. of cylinder/configuration |
8 / 90ř-V-form; alloy ingot |
| Bore x stroke |
89,9 x 84,0 mm |
| Total displacement |
4266 ccm |
| Compression ratio |
10,0 |
| Crankshaft bearing |
5 |
| Output |
225 kW / 306 hp at 5850 /min |
| Maximum torque |
410 Nm at 3250 - 5000 /min |
| No. of valves/configuration |
2 adm., 1 exhaust / V-type pendent |
| Valve operation |
row of cylinders each 2 aloft cam-shaft |
| Camshaft drive |
Duplex-roller chain |
| Mixture formation |
microprocessor controlled injection device with hot- film air mass control (engine control Bosch ME) |
| Cooling |
Water-cooling / pump; 10,0 l water |
| Lubrication |
Pressure lubrication / 8,0 l oil |
| Electric system |
12 V |
| Battery |
100 Ah / in the trunk |
| Dynamo |
Rotary current / 2100 W |
| Starter motor |
electr. / 1,7 kW |
| Ignition |
ignition performance graph; phase shift dual-ignition |
| Fuel tank |
before rear-axle / 62 l |
| Fuel supply |
el. fuel pump |
| Driven whells |
rear wheel |
| Power transmission |
split drive-shaft |
| Frame desing |
self-supporting all-steel body |
| Wheel suspension front |
dual-traverse lever |
| Wheel suspension rear |
spatial rod axle |
| Suspension front |
spiral springs, torsion-bar stabilizer |
| Suspension rear |
coil springs, torsion bar stabilizer |
| Damper |
gas-pressure shock-absorber |
| Steering |
ball revol. servo steering |
| Steering transm ratio |
15,41:1 / 3,0 steering wheel turns |
| Breaking system |
retard. circuit |
| Breaking system |
hydr. two-cycl. braking device with underpression brake-force-~amplifier, anti-blocking system and brake assistent;~inner-ventilated disk brakes fore and aft |
| Parking breake |
locking brake |
| Parking breake |
mech. (pedal operated), on rear wheels acting |
| Diamatre |
friction disk fore / aft: 288 / 278 mm |
| Wheels |
light alloy disk wheels |
| Wheels rims |
front: 7 1/2 J x 17 H 2; at the rear: 8 1/2 J x 17 H 2 |
| Tyres |
fore 225/45 ZR 17; rear 245/40 ZR 17 |