| |
|
T-Models of the series 124
Mercedes-Benz type 200 TE |
| Type |
200 TE |
| Name |
200 TE |
| Name |
Mercedes-Benz type 200 TE |
| Short name |
200 TE |
| Model |
S 124 E 20 |
| Production |
07.88/10.88 - 08.89 |
| Number produced |
altogether 20.555 (until 10.92) |
| Comments concerning the production period |
begin of production - pre-production batch / main production - end of production |
| Prices |
09.88: 46.854,00 DM
02.89: 47.823,00 DM |
| Wheelbase |
2800 mm |
| Track rear/front |
1497/1488 mm |
| Length |
4765 mm |
| Width |
1740 mm |
| Height |
1490 mm (with roof rails) |
| Smallest turning circle |
11,2 m |
| Chassis weight |
| Max. total weight |
2030 kg; since 12.88: 2060 kg |
| Max. front axle weight |
835 kg; since 12.88: 855 kg |
| Max. rear axle weight |
1195 kg; since 12.88: 1205 kg |
| Max. load |
620 kg |
| Max. trailer weight braked |
1500 kg |
| Max. trailer weight unbraked |
740 kg; since 12.88: 750 kg |
| Weight empty |
1410 kg; since 12.88: 1440 kg |
| According to guideline |
DIN 70020 (with fuel, spare wheel and tool equipment) |
| Operating method |
four-stroke Otto (w/ manifold-injection and emission control device w/ three-way catalyst) |
| Configuration |
front, parallel; upright |
| Type |
M 102 E 20 / 102.963 |
| No. of cylinder/configuration |
4 / in line; 15ř inclination to the right |
| Bore x stroke |
89,0 x 80,2 mm |
| Total displacement |
1996 ccm |
| Compression ratio |
9,1 |
| Crankshaft bearing |
5 |
| Output |
118 hp / 87 kW at 5200 /min~(RF-version: 122 hp / 90 kW at 5100 /min) |
| Maximum torque |
172 Nm (RF-version: 178 Nm) at 3500 /min |
| No. of valves/configuration |
1 intake, 1 exhaust / V-shaped overhead |
| Valve operation |
top camshaft |
| Camshaft drive |
simple roller-type chain |
| Mixture formation |
manifold-injection, mechano-electronically controlled~(Bosch KE-Jetronic) |
| Cooling |
water cooling / pump; 8,5 l water |
| Lubrication |
pressure circulation lubrication / 5 l oil |
| Electric system |
12 V |
| Battery |
62 Ah / in the engine compartment |
| Dynamo |
three-phase AC / 770 W |
| Starter motor |
electrical / 1,4 kW |
| Ignition |
electronic ignition system |
| Fuel tank |
behind the rear axle / 72 l |
| Fuel supply |
electric supply pump |
| Driven whells |
rear wheels |
| Power transmission |
divided cardan shaft |
| Frame desing |
self-supporting all-steel body |
| Wheel suspension front |
triangle-wishbone / shock-absorber strut |
| Wheel suspension rear |
multilink suspension with hydropneumatic level control |
| Suspension front |
coil springs, torsion bar stabilizer |
| Suspension rear |
coil springs, hydropneumatic spring struts, torsion bar stabilizer |
| Damper |
gas-pressure shock absorber struts / hydropneumatic spring struts |
| Steering |
ball-and-nut power steering |
| Steering transm ratio |
15,44:1 / 3 steering wheel turns |
| Breaking system |
braking system |
| Breaking system |
hydraulic dual-circuit braking system with vacuum-operated brake servo unit and antilock device;~disc brakes front and rear |
| Parking breake |
parking brake |
| Parking breake |
mechanical (foot-operated), effective on rear wheels |
| Diamatre |
brake discs front / rear: 284 / 278 mm |
| Wheels |
sheet steel-disc wheels, on demand light-alloy disc wheels |
| Wheels rims |
6 1/2 J x 15 H 2 |
| Tyres |
195/65 R 15 91 T |
Skrzynie biegów tego modelu (gearbox and performance):
T-Models of the series 124
Mercedes-Benz type 200 TE |
| Gearbox |
4-speed gear shift |
| Availability |
Series |
| Shifting |
Feed control |
| Clutch |
Single-plate dry clutch |
| Type of gearbox |
Pinion change gear |
| Synchromesh gears |
I - IV |
| Gear transmission |
I. 3,91; II. 2,17; III. 1,37; IV. 1,0; R. 3,78 |
| Differential ratio |
3,64 |
| Maximum speed |
180 km/h (RF-Version: 182 km/h) |
| Accelerations |
12,9 s (RF-Version: 12,4 s) |
| Comments |
Acceleration with shifting through from 0 - 100 km/h; loaded with 2 persons |
| Fuel consumption |
7,6/9,8/12,2 l (RF-Version: 7,3/8,9/11,7 l) |
| acc. to guideline |
80/1268/EWG; values for 90 km/h / 120 km/h / city cycle |
T-Models of the series 124
Mercedes-Benz type 200 TE |
| Gearbox |
5-speed gear shift |
| Availability |
by request |
| Shifting |
Feed control |
| Clutch |
Single-plate dry clutch |
| Type of gearbox |
Pinion change gear |
| Synchromesh gears |
I - V |
| Gear transmission |
I. 3,91; II. 2,17; III. 1,37; IV. 1,0; V. 0,78; R. 4,27 |
| Differential ratio |
3,64 |
| Maximum speed |
180 km/h (RF-Version: 182 km/h) |
| Accelerations |
12,9 s (RF-Version: 12,4 s) |
| Comments |
Acceleration with shifting through from 0 - 100 km/h; loaded with 2 persons |
| Fuel consumption |
6,9/9,0/12,2 l (RF-Version: 6,8/8,6/11,7 l) |
| acc. to guideline |
80/1268/EWG; values for 90 km/h / 120 km/h / city cycle |
T-Models of the series 124
Mercedes-Benz type 200 TE |
| Gearbox |
4-speed autom. gear shift |
| Availability |
by request |
| Shifting |
Switch lever in car center |
| Clutch |
hydr. torque converter in autom. gear |
| Type of gearbox |
Planet gear |
| Synchromesh gears |
|
| Gear transmission |
I. 4,25; II. 2,41; III. 1,49; IV. 1,0; R. 5,67 |
| Differential ratio |
3,64 |
| Maximum speed |
175 km/h (RF-Version: 177 km/h) |
| Accelerations |
13,1 s (RF-Version: 12,5 s) |
| Comments |
Acceleration with shifting through from 0 - 100 km/h; loaded with 2 persons |
| Fuel consumption |
8,0/10,2/12,0 l (RF-Version: 7,7/9,7/11,6 l) |
| acc. to guideline |
80/1268/EWG; values for 90 km/h / 120 km/h / city cycle |
| |