|
|
T-Models of the series 124 Mercedes-Benz type 200 TD |
Type |
200 TD |
Name |
200 TD |
Name |
Mercedes-Benz type 200 TD |
Short name |
200 TD |
Model |
S 124 D 20 |
Production |
10.85/11.85 - 08.89 |
Number produced |
altogether 7.373 (until 06.91) |
Comments concerning the production period |
begin of production - pre-production batch / main production - end of production |
Prices |
09.85: 39.444,00 DM
09.86: 41.040,00 DM
06.87: 42.408,00 DM
02.88: 43.320,00 DM
09.88: 44.688,00 DM
02.89: 45.600,00 DM |
Wheelbase |
2800 mm |
Track rear/front |
1497/1488 mm |
Length |
4765 mm |
Width |
1740 mm |
Height |
1490 mm (with roof rails) |
Smallest turning circle |
11,2 m |
Chassis weight |
Max. total weight |
2030 kg; since 12.88: 2050 kg |
Max. front axle weight |
840 kg; since 03.87: 830 kg; since 12.88: 850 kg |
Max. rear axle weight |
1190 kg; since 03.87: 1200 kg |
Max. load |
620 kg |
Max. trailer weight braked |
1500 kg |
Max. trailer weight unbraked |
750 kg |
Weight empty |
1410 kg; since 12.88: 1430 kg |
According to guideline |
DIN 70020 (with fuel, spare wheel and tool equipment) |
Operating method |
four-stroke Diesel (w/ indirect injection) |
Configuration |
front, parallel; upright |
Type |
OM 601 D 20 / 601.912 |
No. of cylinder/configuration |
4 / in line; 15ř inclination to the right |
Bore x stroke |
87,0 x 84,0 mm |
Total displacement |
1997 ccm (tax classification: 1983 ccm) |
Compression ratio |
22,0 |
Crankshaft bearing |
5 |
Output |
72 hp / 53 kW at 4600 /min;~since 02.89: 75 hp / 55 kW at 4600 /min |
Maximum torque |
123 Nm at 2800 /min; since 02.89: 126 Nm at 2700 - 3550 /min |
No. of valves/configuration |
1 intake, 1 exhaust / overhead |
Valve operation |
top camshaft |
Camshaft drive |
duplex roller-type chain |
Mixture formation |
indirect injection, mechanically controlled;~Bosch 4-plunger-type injection pump |
Cooling |
water cooling / pump; 8,5 l water |
Lubrication |
pressure circulation lubrication / 6,5 l oil |
Electric system |
12 V |
Battery |
72 Ah / in the engine compartment |
Dynamo |
three-phase AC / 770 W |
Starter motor |
electrical / 2,2 kW |
Ignition |
compression ignition engine |
Fuel tank |
behind the rear axle / 72 l |
Fuel supply |
piston pump at the injection pump |
Driven whells |
rear wheels |
Power transmission |
divided cardan shaft |
Frame desing |
self-supporting all-steel body |
Wheel suspension front |
triangle-wishbone / shock-absorber strut |
Wheel suspension rear |
multilink suspension with hydropneumatic level control |
Suspension front |
coil springs, torsion bar stabilizer |
Suspension rear |
coil springs, hydropneumatic spring struts, torsion bar stabilizer |
Damper |
gas-pressure shock absorber struts / hydropneumatic spring struts |
Steering |
ball-and-nut power steering |
Steering transm ratio |
15,44:1 / 3 steering wheel turns |
Breaking system |
braking system |
Breaking system |
hydraulic dual-circuit braking system with vacuum-operated brake ~servo unit, on demand with antilock device (since 09.88 standard);~disc brakes front and rear |
Parking breake |
parking brake |
Parking breake |
mechanical (foot-operated), effective on rear wheels |
Diamatre |
brake discs front / rear: 284 / 278 mm |
Wheels |
sheet steel-disc wheels, on demand light-alloy disc wheels |
Wheels rims |
6 1/2 J x 15 H 2 |
Tyres |
195/65 R 15 91 T |