|
|
Rover of the series 460, 463 and 461 Mercedes-Benz type 250 GD |
Type |
250 GD |
Name |
250 GD |
Name |
Mercedes-Benz type 250 GD |
Short name |
250 GD |
Model |
463 GD 25 |
Production |
07.89/05.90 - 12.91 |
Number produced |
31 |
Comments concerning the production period |
begin of production - pre-production batch / main production - end of production |
Prices |
station wagon
09.89: 70.452,00 DM
01.90: 72.276,00 DM
10.90: 74.442,00 DM
06.91: 76.685,00 DM |
Wheelbase |
2850 mm |
Track rear/front |
1425/1425 mm |
Length |
4635 mm |
Width |
1690 mm |
Height |
1936 mm |
Smallest turning circle |
13,24 m |
Chassis weight |
Max. total weight |
2950 kg |
Max. front axle weight |
1380 kg |
Max. rear axle weight |
1800 kg |
Max. load |
745 kg |
Max. trailer weight braked |
2950 kg |
Max. trailer weight unbraked |
750 kg |
Weight empty |
2205 kg |
According to guideline |
|
Operating method |
four-stroke Diesel (with indirect injection) |
Configuration |
front, parallel; upright |
Type |
OM 602 D 25 / 602.931 |
No. of cylinder/configuration |
5 / in line; 15ř inclination to the right |
Bore x stroke |
87,0 x 84,0 mm |
Total displacement |
2497 ccm |
Compression ratio |
22 |
Crankshaft bearing |
6 |
Output |
69 kW / 94 hp at 4600 /min |
Maximum torque |
158 Nm at 2600 - 3100 /min |
No. of valves/configuration |
1 intake, 1 exhaust / overhead |
Valve operation |
top camshaft |
Camshaft drive |
duplex roller-type chain |
Mixture formation |
indirect injection, mechanically controlled;~Bosch 5-plunger-type injection pump |
Cooling |
water cooling / pump; 7,3 l water |
Lubrication |
pressure circulation lubrication / 7,5 l oil |
Electric system |
12 V |
Battery |
72 Ah / in the engine compartment |
Dynamo |
three-phase AC / 770 W |
Starter motor |
electrical / 2,2 kW |
Ignition |
compression ignition engine |
Fuel tank |
under load floor / 96 l |
Fuel supply |
piston pump at the injection pump |
Driven whells |
permanent four-wheel drive on front and rear wheels |
Power transmission |
from power divider via single-piece propeller shafts on front-axle differential and rear-axle differential |
Frame desing |
dropped square tube ladder-type frame / all-steel body |
Wheel suspension front |
rigid axle; 2 trailing arm, 1 wishbone (Panhard bar) |
Wheel suspension rear |
rigid axle; 2 trailing arm, 1 wishbone (Panhard bar) |
Suspension front |
coil springs, suppl. rubber suspension, torsion bar stabilizer |
Suspension rear |
coil springs, suppl. rubber suspension |
Damper |
hydraulic telescopic damper |
Steering |
ball-and-nut power steering |
Steering transm ratio |
19,1:1 / 3,8 steering wheel turns |
Breaking system |
braking system |
Breaking system |
hydraulic dual-circuit braking system with vacuum-operated brake servo unit, on demand with antilock device; disc brakes front, drum brakes rear |
Parking breake |
parking brake |
Parking breake |
mechanical (manually opertated), effective on rear wheels |
Diamatre |
brake discs front 303 mm; brake drums rear 260 mm |
Wheels |
sheet steel-disc wheels, on demand light-alloy wheels |
Wheels rims |
6 J x 16 H 2 |
Tyres |
205 R 16 M+S |