|
|
Coups of the series 123 Mercedes-Benz type 300 CD |
Type |
300 CD |
Name |
300 CD |
Name |
Mercedes-Benz type 300 CD |
Short name |
300 CD |
Model |
C 123 D 30 |
Production |
05.77/09.77 - 08.81 |
Number produced |
7.502 |
Comments concerning the production period |
begin of production - pre-production batch / main production - end of production |
Prices |
not available in Germany |
Wheelbase |
2710 mm |
Track rear/front |
1488/1446 mm |
Length |
4763 mm |
Width |
1786 mm |
Height |
1395 mm |
Smallest turning circle |
11,0 m |
Chassis weight |
Max. total weight |
2015 kg |
Max. front axle weight |
960 kg |
Max. rear axle weight |
1055 kg |
Max. load |
465 kg |
Max. trailer weight braked |
|
Max. trailer weight unbraked |
|
Weight empty |
1550 kg |
According to guideline |
DIN 70020 (with fuel, spare wheel and tool equipment) |
Operating method |
four-stroke Diesel (with indirect injection) |
Configuration |
front, parallel; upright |
Type |
OM 617 D 30 / 617.912 |
No. of cylinder/configuration |
5 / in line |
Bore x stroke |
91,0 x 92,4 mm; since 08.78: 90,9 x 92,4 mm |
Total displacement |
3005 ccm; ab 08.78: 2998 ccm |
Compression ratio |
21,5 |
Crankshaft bearing |
6 |
Output |
78 hp / 58 kW at 4400 /min;~since 09.79: 84 hp / 64 kW at 4200 /min |
Maximum torque |
156 Nm at 2400 /min; since 09.79: 163 Nm at 2400 /min |
No. of valves/configuration |
1 intake, 1 exhaust / overhead |
Valve operation |
top camshaft |
Camshaft drive |
duplex roller-type chain |
Mixture formation |
indirect injection, mechanically controlled;~Bosch 5-plunger-type injection pump |
Cooling |
water cooling / pump; 11 l water |
Lubrication |
pressure circulation lubrication / 5 l oil |
Electric system |
12 V |
Battery |
88 Ah / in the engine compartment |
Dynamo |
three-phase AC / 770 W |
Starter motor |
electrical / 2,0 kW; since 1980: 2,3 kW |
Ignition |
compression ignition engine |
Fuel tank |
above the rear axle / 80 l |
Fuel supply |
piston pump at the injection pump |
Driven whells |
rear wheels |
Power transmission |
divided cardan shaft |
Frame desing |
self-supporting all-steel body |
Wheel suspension front |
double wishbone-front axle with torsion bar type stabilizer |
Wheel suspension rear |
diagonal-swing axle, on demand with hydropneumatic level control |
Suspension front |
coil springs, suppl. rubber suspension, torsion bar stabilizer |
Suspension rear |
coil springs, suppl. rubber suspension, torsion bar stabilizer |
Damper |
hydraulic telescopic damper |
Steering |
ball-and-nut power steering |
Steering transm ratio |
16,55:1 / 3,2 steering wheel turns |
Breaking system |
braking system |
Breaking system |
hydraulic dual-circuit braking system with vacuum-operated brake ~servo unit, since 08.80 on demand with antilock device; disc brakes front and rear |
Parking breake |
parking brake |
Parking breake |
mechanical (foot-operated), effective on rear wheels |
Diamatre |
brake discs front / rear: 278 / 279 mm |
Wheels |
sheet steel-disc wheels, on demand light-alloy disc wheels |
Wheels rims |
6 J x 14 H 2 |
Tyres |
195/70 HR 14 89 H |